Dynamic Reflections Optimization

To optimize the scene with planar reflections, you can apply the following approach: set up the scene so that only the required planar reflections are rendered, and use less consuming Screen Space Reflections (SSR) for other reflections. An example workflow is as follows:

1. Decide, which bit of the viewport mask would be responsible for reflection of the object.
2. Open the Camera Settings window and enable the selected bit in the Reflection Viewport mask of the camera.

   

3. In the Materials Hierarchy, select the reflective material and enable the same bit in the Planar Reflection Viewport Mask in the Parameters tab of the Material Editor.

   

4. In the World Hierarchy, select the node to be reflected and go to the Node tab of the Parameters window.
5. In the Surfaces section, enable the selected bit in the Viewport Mask for all surfaces that should be reflected.
   Notice

   You can create the special low-poly LOD surface that will be used for reflections only; the viewport mask of such a LOD shouldn't match the camera's viewport mask to exclude it from rendering.
6. In the Materials Hierarchy, select the material of the node that should be reflected and enable the selected bit in the Viewport Mask in the Common tab of the Materials Editor.

   In the picture below, the reflection viewport mask of the plane has the same matching bit (or bits) with the camera reflection viewport mask and the viewport masks of the red material ball and its material. The viewport masks of the other material balls don't have a matching bit with the reflection camera viewport mask and/or with the planar reflection viewport mask and, therefore, they aren't reflected:

   

   Masked planar reflection
7. Enable Screen Space Reflection to produce reflections of other nodes in the scene: on the Menu Bar, toggle the Rendering -> Features -> SSR option on.
   Notice

   The SSR effect should be also enabled for the reflective material: go the Post Processing section of the States tab and check if the SSR option is enabled.

   

   Masked planar reflection + SSR

Dynamic reflections provided by environment probes can be optimized in the same way as described above. To specify the reflection viewport mask for the environment probe, go to the Environment Probe tab of the Parameters window and set the Reflection Viewport Mask parameter in the Baking Settings section.

In the left picture below, the reflection viewport mask of the environment probe matches the camera's reflection viewport mask and the viewport masks of the red material ball and its material. In the right picture, the reflection viewport mask of the environment probe doesn't match the camera's reflection viewport mask:

Notice

An example of using reflection masks is also available in the Content Optimization video tutorial.