Console

UNIGINE console is used for standard input, output and error streams for the file loading, rendering system, audio and video systems, path-finding system, physics engine, file system and many others.

Can be opened in any UNIGINE-based application.

How to Open Console#

A built-in console is called by pressing the grave accent (`) key, placed under the ESC key:

The console can be hidden by pressing the grave accent (`) key one more time. See how to assign another key here.

Console Operation#

Console operation can be either command or variable:

Command is a directive to a console to perform a specific task.
Variable is an identifier that contains some stored value.

Command Syntax#

Console command can take null, one or several arguments. The syntax is:

Source code

command_to_execute // null argument
command_to_execute argument // one argument
command_to_execute argument argument // two arguments

Hints#

To see the current variable value, other acceptable values and short description, just type it and press the Enter key. For example, if you type the video_resizable variable, you get the following result:
Source code
```
video resizable toggle
0 is non-resizable mode
1 is resizable mode
video_resizable = 1
```
To complete a command or variable name, just start typing first letters and press the TAB key until you get the required result.

How to Change the Console Opening Key#

If you want to change the default grave accent (`) console turning on or off key, do one of the following actions:

Open the configuration file data/unigine.cfg and change the ASCII-based key code in the following line:
Source code (XML)
```
<item name="console_key" type="int">96</item>
```

Console#

Basic operations on the console, command and variable.

Name	Description	Arguments
bind	Command. Bind a key to a command. For example, to bind the asterisk () key to the world_reload command, type: Source code `Unigine~# bind world_reload`	1. A key to bind 2. A command to execute
clear	Command. Clear all messages from the console window.
console_key	Variable. Print the ASCII code of the current console turning on or off key. Command. Assign a new key to turn on or off the console.	An ASCII code of the key
help	Command. Print the list of the built-in commands.
hide	Command. Hide the console.
ls	Command. Print a set of all available console keys, commands and variables.
show	Command. Show the console.
switch	Command. Switch among all variable values. Notice Make sure, that the variable is integer.	A variable, which values will be switched
toggle	Command. Enable or disable a variable. Notice Enabled variable will have a default value. For example, if you toggle the show_visualizer variable, you will get the following result: Source code `toggle show_visualizer show_visualizer = 0 // disabled visualizer toggle show_visualizer show_visualizer = 1 // enabled visualizer`	A variable to be toggled
unbind	Command. Unbind a key from a command.	A key to unbind

Console GUI#

Operations on the console GUI.

Name	Description	Arguments
console_size	Variable. Print a current size of the console font. Command. Set a size for the console font.	4 – 32 (16 by default)
console_font	Variable. Print a current path to a .ttf file used as a console font. Command.* Set a path to a *.ttf file to be used as a console font.	A path to a *.ttf file (core/gui/console.ttf by default)

Engine#

Basic operations on the engine.

Name	Description	Arguments
engine_threaded	Variable. Print a value specifying if all _threaded console variables are enabled. Command.* Globally Enable or disable all *_threaded console variables ( world_threaded , physics_threaded , pathfind_threaded ). Notice If these variables are enabled, multithreading is used.	0 - disabled 1 - enabled (by default)
engine_version_info	Command. Prints the current engine version info.
quit	Quit the engine.

Engine Configuration File#

General operations on the engine configuration.

Name	Description	Arguments
config_load	Command. Load engine configuration from a configuration file.	A path to the configuration file to be loaded (data/unigine.cfg by default)
config_readonly	Variable. Print the value specifying if the data could be written to the configuration file. Command. Specify if the data could be written to the configuration file.	0 - writing is allowed 1 - writing is forbidden
config_save	Command. Save the engine configuration file.	A path to the configuration file (optional)

Engine Analyzer#

Operations on the engine debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
engine_analyze	Command. Analyze the performance of the engine. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the log file to dump the log file information into (optional)

World#

Basic operations on world.

Name	Description	Arguments
world_load	Command. Load the specified world. A cache file can also be specified for faster application loading.	1. A name of the world to load (inside of the data directory) 2. A name of the world cache file (optional)
world_quit	Command. Clear all the world data.
world_save	Command. Save the world. Notice Materials won't be saved on running the command. To save them, use materials_save.
world_reload	Command. Reload the world. A cache file can also be specified to be reloaded.	A name of the world cache file (optional)
world_handler_3d	Variable. Print the value indicating which world handler is used. Command. Set the world handler.	0 - screen scale 1 - 3D

World State#

Serialized operations on world.

Name	Description	Arguments
state_save	Command. Save states of all world nodes into the .save file and take a screenshot. Notice File is saved as quicksave.save in the /bin/save directory by default. You can pass another directory as an argument.	1. A path to the file (optional) 2. A noscreenshot flag - save a state without taking a screenshot (optional)
state_restore	Command. Restore states of all world nodes. Notice File is restored using quicksave.save file in the /bin/save directory by default. You can pass another directory as an argument.	A path to the file (optional)

World Resources#

Operations, representing information on ObjectGrass, ObjectMeshClutter andWorldClutter objects.

Name	Description
world_manager_info	Command. Print general information (the number of registered/loaded resources; used memory) on world manager resources, such as: ImageManaged - loaded images (if not fully loaded, a dummy texture or one-mipmap texture is used) PathManaged - loaded splines ImageStream - streamed mask images MeshStream - streamed meshes used as an intersection mask for grass or clutters
world_manager_list	Command. Print the list of resources handled by the world manager (mask images for ObjectGrass and WorldClutter objects), if any.
world_spawn_list	Command. Print the list of generation requests for ObjectGrass and ObjectMeshClutter nodes with the following information: Node type Node ID Camera position coordinates Frame number

Notice

To get information on loaded meshes and images, see the Render resources section.

World Queueing#

Operations on the world queued nodes.

Name	Description	Arguments
world_queue	Command. Print names of all the queued nodes, if any.
world_delay	Variable. Print the current time delay between loading of the queued nodes in seconds. Command. Set the time delay between loading of the queued nodes in seconds. For example, this function can be used to debug streaming of resources.	0 – 1 (0 by default)
world_clear	Command. Clear the queue and all of the loaded nodes.

Sound#

Operations on the sound.

Name	Description	Arguments
sound_occlusion	Variable. Print the value indicating if sound occlusion is enabled. Command. Occlude sound if other nodes are found in front of the sound source.	0 - disabled 1 - enabled (by default)
sound_reverb	Variable. Print the current sound reverberation mode. Command. Set a sound reverberation mode.	0 - sound reverberation is disabled 1 - single-environment sound reverberation 2 - multi-environment sound reverberation (by default)

Sound Resources#

Operations on the sound resources.

Name	Description	Arguments
sound_manager_load_samples	Variable. Print the value indicating if sound samples are preloaded on world loading. Command. Preload sound samples on world loading (ensure there are no lags afterwards but increases loading time and memory footprint).	0 - disabled (by default) 1 - enabled
sound_manager_info	Command. Print general information on sound resources: the number of static and streamed sound sources (registered/loaded; memory used).
sound_manager_list	Command. Print the detailed list of sound files, if any, with used space.
sound_manager_sample_static_memory	Variable. Print the current cache memory limit for static sound resources in Mbytes. Command. Set the cache memory limit for static sound resources in Mbytes.	1 – 1024 (64 by default)
sound_manager_sample_stream_memory	Variable. Print the current cache memory limit for streamed sound resources in Mbytes. Command. Set the cache memory limit for streamed sound resources in Mbytes.	1 – 1024 (16 by default)

Material Manager#

Operations on materials.

Name	Description	Arguments
material_load	Command. Loads the specified manual material.	Path to the manual material file.
material_reload	Command. Reloads the specified manual material.	Path to the manual material file.
material_create_shaders	Command. Creates all shaders for the specified manual material.	Path to the manual material file.
material_manager_info	Command. Prints information on all loaded materials (e.g. the number of loaded shaders; states, textures and parameters that don't exist in the parent material).
materials_reload	Command. Reloads all loaded materials.
materials_save	Command. Saves all loaded materials.
shaders_create	Command. Creates all shaders for all loaded materials, updates the shaders cache if necessary, and loads shaders to RAM.
shaders_create_all	Command. Creates possible shader combinations for the current configuration.
shaders_compile	Command. Compiles shaders for all loaded materials.
shaders_destroy	Command. Removes all shaders from RAM. Notice This command can be used to clear RAM after shader cache generation.

Camera#

Operations for fast positioning of the game camera.

Name	Description	Arguments
camera_get	Command. Get the current position of the game camera and its rotation (Euler angles).
camera_set	Command. Set position and rotation (Euler angles) of the game camera. Notice Position and rotation of the game camera can be changed only if it is unlocked. Source code `camera_set 20.0 19.0 3.0 0.0 45.0 90.0`	The first 3 arguments set position. The second 3 arguments set rotation (optional)

File System#

Operations on the File system.

Name	Description	Arguments
filesystem_clear_paths	Command. Remove all non-existent file system paths.
filesystem_ignore	Variable. Print the list of ignored directories. Command. Set the folders to be ignored within the data directory. It can be used to discard version control system folders. This option comes into effect only after the filesystem_reload command is run. Notice Multiple values are comma separated (no whitespaces).	A full directory name
filesystem_mmap	Variable. Print the value indicating if memory-mapped files are used. Command. Use memory-mapped files for faster access.	0 - not used 1 - used (default)
filesystem_reload	Command. Reload the file system, thereby update the list of files.
filesystem_save_guids	Command. Saves all file system guids to the specified file path in JSON format, or binary format if the corresponding flag is set.	1. path to the file 2. binary flag - save guids to a file in binary format (optional)

File System Info#

Operations, representing information on the File system.

Name	Description	Arguments
filesystem_guids	Command. Print the list of all file system guids.
filesystem_info	Command. Print general file system information (the total number of files and files per package).
filesystem_list	Command. Print the list of all files.

Editor#

Operations on UnigineEditor.

Name	Description	Arguments
editor_load	Command. Load UnigineEditor (both Qt and Unigine-native GUI will be loaded).
editor_quit	Command. Quit UnigineEditor (both Qt and Unigine-native GUI will be hidden).
editor_reload	Command. Reload UnigineEditor (both Qt and Unigine-native GUI will be reloaded). This command reloads the editor script, all unsaved changes are lost.

Editor Controls#

Operations on UnigineEditor controls.

Name	Description	Arguments
default_presets_edit_mode	Command. Enable or disable default preset editing.	0 - disable editing (by default) 1 - enable editing

Assets#

Operations on assets.

Name	Description
assets_info	Command. Print information on the number of non-native assets and runtime files generated for them.
assets_list	Command. Print the list of all non-native assets and information on runtime files generated for them (file path, alias).

Scripts#

Operations on the world, system and editor scripts.

Editor Script Analyzer#

Operations on the editor script debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
editor_memory_usage	Command. Print memory usage by the editor script to the console or dump into a specified file.	A path to a file to dump the information into (optional)
editor_analyze	Command. Analyze the performance of the editor script. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the log file to dump the log file information into (optional)
editor_disassemble	Command. Disassemble the editor script. The information can be printed to the console or dumped into a specified file.	A path to a file to dump the information into (optional)

System Script Analyzer#

Operations on the system script debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
system_memory_usage	Command. Print memory usage by the system script to the console or dump into a specified file.	A path to a file to dump the information into (optional)
system_analyze	Command. Analyze the performance of the system script. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the log file to dump the log file information into (optional)
system_disassemble	Command. Disassemble the system script. The information can be printed to the console or dumped into a specified file.	A path to a file to dump the information into (optional)

World Script Analyzer#

Operations on the world script debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
world_memory_usage	Command. Print memory usage by the world script to the console or dump into a specified file.	A path to a file to dump the information into (optional)
world_analyze	Command. Analyze the performance of the world script. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the log file to dump the log file information into (optional)
world_disassemble	Command. Disassemble the world script. The information can be printed to the console or dumped into a specified file.	A path to a file to dump the information into (optional)
world_manager_images_memory	Variable. Print the cache memory limit set for images in MB. Command. Set the cache memory limit for images in MB.	0 - 8192 (128 by default)
world_manager_meshes_memory	Variable. Print the cache memory limit set for meshes in MB. Command. Set the cache memory limit for meshes in MB.	0 - 8192 (128 by default)

Script Debugger#

Operations on the per-function breakpoint. The syntax to set the breakpoint is the following:

Source code

system_breakpoint/world_breakpoint/editor_breakpoint set/remove function_name number_of_arguments

Name	Description	Arguments
world_breakpoint	Command. Set a breakpoint to the specified function in the world script. The syntax to set the breakpoint is the following: Source code `world_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments
system_breakpoint	Command. Set a breakpoint to the specified function in the system script. The syntax to set the breakpoint is the following: Source code `system_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments
editor_breakpoint	Command. Set a breakpoint to the specified function in the editor script. The syntax to set the breakpoint is the following: Source code `editor_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments

Multi-Threading#

Name	Description	Arguments
world_threaded	Variable. Print the thread mode used to update the world. Command. Specify if the world will be updated in a single or multiple-threaded mode.	0 - single-threaded 1 - multiple-threaded (by default) Multiple-threaded mode creates 8 thread jobs and splits the nodes hierarchy: it finds root nodes (with their children) and distributes them in a balanced manner. Nodes are distributed between thread jobs, thread jobs are distributed between CPUs cores. Then, in each thread, it selects nodes to be updated. Thus, world update takes less time in case of complex nodes hierarchy.
physics_threaded	Variable. Print the value indicating how many threads are used to perform physical calculations. Command. Set a number of threads used to perform physical calculations.	0 - separate thread is not used at all (physics will be calculated in the main thread) - flush() and render() are called sequentially 1 - one separate thread is used (physics will be calculated in separate thread) - flush() and render() are called simultaneously 2 - all available CPUs are used to perform multi-threaded physical calculations (by default)
pathfind_threaded	Variable. Print the value indicating how many threads are used to perform pathfinding calculations. Command. Set a number of threads used to perform pathfinding calculations.	0 - use single-threaded mode for pathfinding calculations 1 - use multi-threaded mode for pathfinding calculations (by default)

Asynchronous Operations#

Asynchronous operations.

Name	Description	Arguments
async_log_mode Notice Available for debug builds only, won't work for release builds.	Variable. Print the value indicating which engine component's operations are shown. Command. Print the list of asynchronous operations (loading / unloading of images, meshes, files, etc.) related to the specified engine component. Notice You can specify whether only loading and unloading operations, or all operations should be shown.	0 - do not print 1 - print operations with the nodes 2 - print operations with the renderer resources (loading / unloading of meshes and textures) 3 - print operations with the file system resources (loading / unloading of files) 4 - print all operations with the nodes, renderer and file systems resources
async_log_priority	Variable. Print the value indicating whether only loading and unloading operations, or all operations are shown via async_log_mode . Command. Specify whether only loading and unloading operations, or all operations will be shown via async_log_mode .	0 - print only frequently used operations 1 - print all operations
async_queue_info	Command. Print the info on async queue resource count and memory usage.
async_queue_list	Command. Print the list of async queue resources.
async_queue_clear	Command. Clear the async queue.

Visualizer#

Operations on the visualizer.

Notice

To debug the world and objects within it, the show_visualizer command should be set to 1.

Name	Description	Arguments
show_visualizer	Variable. Print the current visualizer mode. Command. Specify if the visualizer geometry (bounding volumes, wireframe, physics bodies and shapes, etc.) is shown.	0 - visualizer is not shown (by default) 1 - visualizer is shown with a depth testing (to check if other objects in the scene do not occlude visualized geometry) 2 - visualizer is shown without a depth testing (visualized geometry is rendered in front of all objects in the scene)
show_fps	Variable. Print the value indicating if the FPS counter is hidden. Command. Show or hide the FPS counter.	0 - hide the FPS counter 1 - display the FPS counter (by default) 2 - display the FPS counter and statistics on the last 600 frames: minimum FPS, maximum FPS and average FPS for the last 600 frames.
show_messages	Variable. Print the value indicating if the system messages are displayed in the viewport. Command. Hide the system messages.	0 - hidden 1 - displayed (by default)

World Debugging#

Operations on the world debugging.

Name	Description	Arguments
world_show_spatial	Variable. Print the value indicating if the scene spatial tree is displayed. Command. Display the scene spatial tree.	0 - hidden (by default) 1 - displayed
world_show_visualizer	Variable. Print the list of node types for which the visualizer is displayed. Command. Set node types for which the visualizer is displayed.	The available arguments are: all world field light decal object player physical navigation obstacle sound To hide the visualizer, pass "" as a argument.
render_show_triangles	Variable. Print the current wireframe mode for scene triangles. Command. Set the wireframe mode for scene triangles.	0 - triangles are hidden (by default) 1 - front faces with the depth test are shown 2 - front faces without the depth test are shown 3 - front and back faces without the depth test are shown

Node Debugging#

Operations on the node debugging.

Name	Description	Arguments
world_show_handler	Variable. Print the value indicating if nodes handlers for lights, particle systems, sectors, portals and so on are displayed. Command. Display nodes handlers for lights, particle systems, sectors, portals, etc.	The available arguments are: all world field light decal object player physical navigation obstacle sound To hide all handlers, pass "" as an argument.
render_show_decals	Variable. Print the value indicating if the wireframe for decals is displayed. Command. Display the wireframe for decals.	0 - hidden (by default) 1 - displayed

Occluder Debugging#

Operations on the occluder debugging.

Name	Description	Arguments
render_show_occluder	Variable. Print the value indicating if buffer used for occluders is displayed in the viewport. Command. Display buffer used for occluders displayed in the viewport.	0 - hidden (by default) 1 - displayed

Physics Debugging#

Name	Description	Arguments
physics_show_collision_surfaces	Variable. Print the value indicating if collision surfaces are displayed. Command. Display/hide collision surfaces.	0 - hidden (by default) 1 - displayed
physics_show_contacts	Variable. Print the value indicating if contact points between physical bodies are displayed. Command. Display/hide contact points between physical bodies.	0 - hidden (by default) 1 - displayed
physics_show_joints	Variable. Print the value indicating if joints between physical bodies are displayed. Command. Display/hide joints between physical bodies.	0 - hidden (by default) 1 - displayed
physics_show_shapes	Variable. Print the value indicating if collision shapes for physical bodies are displayed. Command. Display/hide collision shapes for physical bodies.	0 - hidden (by default) 1 - displayed

Texture Debugging#

Operations on the texture debugging.

Name	Description	Arguments
render_show_mipmaps	Variable. Print the value indicating if mipmap levels are displayed in color. Command. Display mipmap levels in color.	0 - hidden (by default) 1 - displayed in color

Occlusion Queries#

Name	Description	Arguments
render_show_queries	Variable. Print the value indicating if occlusion query boxes are displayed. Command. Display occlusion query boxes. Notice Make sure that the Culled by occlusion query flag is set for nodes.	0 - hidden (by default) 1 - displayed

Performance Profiling#

Operations on the Performance profiler.

Name	Description	Arguments
show_profiler	Variable. Print a mode set to Performance profiler. Command. Specify a mode for Performance profiler.	0 - profiler information is hidden (by default) 1 - generic profiler information is shown 2 - rendering profiler information is shown 3 - physics profiler information is shown 4 - world profiler information is shown 5 - pathfinding and sound usage profiler information is shown

Profiler GUI#

Operations on the Performance profiler style.

Name	Description	Arguments
profiler_size	Variable. Print a current size of the profiler font. Command. Set a size for the profiler font.	4 – 32 (13 by default)
profiler_font	Variable. Print a current path to a .ttf file used as a profiler font. Command.* Set a path to a *.ttf file to be used as a profiler font.	A path to a *.ttf file (core/gui/font.ttf by default)

Microprofile#

Operations on the Microprofile.

Name	Description	Arguments
microprofile_info	Command. Print the Microprofile settings: maximum number of frames that can be profiled, number of dump frames, flag indicating if GPU profiling is enabled, Web server status, Web server port, number of webserver frames. If the application is compiled without Microprofile, the corresponding message will printed to the console.
microprofile_gpu	Variable. Print the value indicating if GPU profiling is enabled. Command. Set the value indicating if GPU profiling is enabled.	0 – GPU profiling is disabled 1 - GPU profiling is enabled (by default)
microprofile_webserver_frames	Variable. Print the number of frames that will be visualised in your Web browser. Command. Set the number of frames that will be visualised in your Web browser.	[1;1000]
microprofile_dump_frames	Variable. Print the number of frames that will be included in the Microprofile dump (saved to the .csv or .html file). Command. Set the number of frames that will be included in the Microprofile dump (saved to the .csv or .html file).	[1;1000]
microprofile_dump_csv	Command. Save the Microprofile dump to a .csv file.	A path to a .csv file. If the path doesn't specified, the dump is saved to data/microprofile_dump_csv folder.
microprofile_dump_html	Command. Save the Microprofile dump to an .html file.	A path to an .html file. If the path doesn't specified, the dump is saved to data/microprofile_dump_html folder.

Video Settings#

Notice

To come to effect, the commands below require video_restart to be run after them.

Name	Description
video_restart	Command. Restart the video application to apply changes to video settings, if any.

Resolution and Full Screen#

Operations on the video resolution adjustment.

Name	Description	Arguments
video_mode	Variable. Print the current video resolution mode. Command. Set a new video resolution mode.	-1 - video_width × video_height 0 - 640 × 360 1 - 960 × 540 2 - 1024 × 576 3 - 1280 × 720 4 - 1366 × 768 5 - 1600 × 900 6 - 1920 × 1080 7 - 2560 × 1440 8 - 3840 × 2160 9 - 640 × 400 10 - 960 × 600 11 - 1024 × 640 12 - 1280 × 800 13 - 1440 × 900 14 - 1680 × 1050 15 - 1920 × 1200 16 - 2560 × 1600 17 - 640 × 480 18 - 800 × 600 19 - 1024 × 768 20 - 1280 × 960 21 - 1280 × 1024 22 - 1600 × 1200 23 - 2048 × 1536 24 - 2560 × 2048
video_width	Variable. Print the current screen width. Command. Set the custom screen width. Notice Valid only if the video_mode command is set to -1.	0 – 10000
video_height	Variable. Print the current screen height. Command. Set the custom screen height. Notice Valid only if the video_mode command is set to -1.	0 – 10000
video_resizable	Variable. Print the value indicating if the application window is resizable. Command. Set a resizable mode for an application window (its size can be changed on the fly without restarting the application).	0 - non-resizable mode (by default) 1 - resizable mode
video_fullscreen	Variable. Print the value indicating if the application is running in full-screen mode. Command. Set full-screen mode for the application window.	0 - windowed mode (by default) 1 - full-screen mode 2 - full-window mode when an application window is rendered without decorations

Graphics Settings#

Operations on the graphics adjustment.

Name	Description	Arguments
video_vsync	Variable. Print the value indicating if the vertical FPS synchronization is enabled. Command. Set the vertical FPS synchronization.	0 - not to synchronize FPS (by default) 1 - synchronize FPS 2 - enable adaptive vertical sync
video_refresh	Variable. Print the current graphics refresh rate. Command. Set the graphics refresh rate.	0 (by default) – 200
video_gamma	Variable. Print the current gamma correction value. Command. Set the gamma correction value.	0.5 – 3.5 (1.0 by default)

Multi-Monitor and Stereo Rendering#

Name	Description	Arguments
video_surround	Variable. Print a value indicating whether rendering across 3 monitors is enabled or not. Command. Enable or disable rendering of the application across 3 monitors.	0 - disabled (by default) 1 - enabled
video_surround_border	Variable. Print the size of monitor bezel compensation in pixels. Command. Set the size of monitor bezel compensation in pixels. It is used together with video_surround enabled.
video_quad_buffer	Variable. Print a value indicating if quad buffering is enabled. Command. Enable quad buffered stereo.	0 - disabled (by default) 1 - enabled

Rendering Settings#

Operations on the renderer.

Name	Description	Arguments
shaders_reload	Command. Reload the renderer. This command reloads all shaders (but does not update shader variables - it is done automatically). It can also be called, for example, for graphics API changes to come to effect.
textures_reload	Command. Reload all render textures.
render_manager_reload	Command. Reload all render manager resources. You can specify an optional argument to reload resources selectively.	mesh - reload only meshes texture - reload only textures

Rendering Resources#

Operations, representing information on the rendering resources.

Name	Description
render_budget	Command. Print current render budget value, which limits the number of loaded/created graphics resources during a frame according to loading/creation time. Budget value is measured seconds. The default value is 1/60.
render_manager_info	Command. Print general information (the number of registered/loaded resources; memory used) on renderer manager resources: Mesh - loaded meshes MeshSkinned - skinned meshes MeshDynamic - dynamic meshes stored in the memory rather than on disk TextureManaged - images loaded into the memory; if image is not fully loaded, a dummy texture or a mipmap texture is used TextureStream - streamed images
render_manager_list	Command. Print the list of loaded resources and detailed information regarding: Meshes, MeshSkinned and MeshDynamic with used memory TextureManaged (textures loaded into memory at once) and TextureStream (textures streamed on demand) with texture format, used compression, if any, texture dimensions and size (available only for already loaded textures).

Rendering Buffers#

Rendering Buffer Info#

Operations, representing information on the rendering buffers.

Name	Description
render_info	Command. Print general information on render buffers: Renderer - GPU and available video memory Per-type information on buffers created by the renderer, their number and used space Total - how much video memory is used in whole
render_list	Command. Print the detailed list of render buffers, with texture size, format and used space.

Rendering Buffer Debugging#

Operations on the rendering buffer debugging.

Name	Description	Arguments
render_show_textures	Variable. Print the current set of buffers used by the renderer. Command. Specify a mode of textures buffers used by the renderer (how many buffers are shown depends on the number of buffers in a row specified by the render_show_textures_number ) command.	0 - all buffers are hidden (by default) 1 - show render textures (compact). 2 - show render textures (full).
render_screen_precision	Variable. Print the value indicating if RGBA16F texture format is used for screen HDR buffers. Command. Set a value indicating if RGBA16F texture format is used for screen HDR buffers.	0 - use RG11B10F texture format 1 - use RGBA16F texture format (by default).
render_show_textures_number	Variable. Print the current number of buffers in a row to be output to the screen. Command. Set the number of buffers in a row to be output to the screen.	A number of buffers in a row (from 1 to 8) (4 by default). 1 - a single texture per screen 2 - 4 textures per screen 3 - 9 textures per screen 4 - 16 textures per screen
render_show_textures_offset	Variable. Print the number of the buffer to start displaying from in the full view mode. Command. Set the number of the buffer to start displaying from in the full view mode.

Rendering Passes#

Operations on rendering passes.

Name	Description	Arguments
render_composite_deferred_material	Variable. Print the list of materials to be used at the Deferred Composite stage of rendering sequence as a string constant. Command. Update the list of materials to be used at the Deferred Composite stage of rendering sequence.	"mat_1, mat_2, ... mat_n" - the list of composite deferred materials
render_debug	Variable. Print the value indicating if the rendering of debug materials is enabled. Command. Enable the rendering of debug materials (the debug_materials material). Debug materials can be used for debugging of image generation stages.	0 - disabled (by default) 1 - enabled
render_debug_materials	Variable. Print the list of debug materials to be rendered as a string constant. Command. Update the list of debug materials to be rendered. Rendering of debug materials must be enabled.	"mat_1, mat_2, ... mat_n" - the list of debug materials
render_depth_pre_pass	Variable. Print the value indicating if depth pre-pass rendering is enabled. Command. Enable or disable depth pre-pass rendering. When enabled, an additional depth buffer rendering pass is performed in the beginning of the rendering sequence. Notice This option can be used to gain performance for well optimized scenes using LODs and having a low-to-medium number of triangles in case of GPU bottlenecks. In other cases (heavy CAD models, large number of triangles and CPU bottlenecks) it may reduce performance, so it is recommended to use profiling tools to make sure that a positive effect is obtained.	0 - disabled 1 - enabled (by default)
render_show_scissors	Variable. Print the value indicating if scissor rectangles are shown. Command. Enable scissor rectangles.	0 - hidden (by default) 1 - shown
render_show_ambient	Variable. Print the value indicating if the ambient pass buffer is displayed Command. Enable displaying of the ambient pass buffer.	0 - hidden (by default) 1 - displayed
render_show_alpha_test	Variable. Print the value indicating if the visualizer is displayed for objects using alpha test. Command. Display the visualizer for objects that are using alpha test.	0 - hidden (by default) 1 - displayed
render_show_transparent	Variable. Print the value indicating if the visualizer is displayed for transparent objects. Command. Display the visualizer for transparent objects.	0 - hidden (by default) 1 - displayed
render_skip_clouds	Variable. Print the value indicating if rendering of clouds is skipped. Command. Skip rendering of clouds.	0 - enabled (by default) 1 - skipped
render_skip_lights	Variable. Print the value indicating if rendering of lights is skipped. Command. Skip rendering of lights.	0 - enabled (by default) 1 - skipped
render_skip_water	Variable. Print the value indicating if rendering of water is skipped. Command. Skip rendering of water.	0 - enabled (by default) 1 - skipped
render_skip_post_materials	Variable. Print the value indicating if the rendering of post materials is skipped. Command. Skip the rendering of post materials.	0 - enabled (by default) 1 - skipped
render_skip_render_materials	Variable. Print the value indicating if the rendering of render materials is skipped. Command. Skip the rendering of render materials.	0 - enabled (by default) 1 - skipped
render_skip_transparent	Variable. Print the value indicating if the transparent pass is skipped. Command. Skip the transparent pass. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped
render_skip_transparent_ambient	Variable. Print the value indicating if the ambient rendering pass is skipped for transparent objects rendering. Command. Skip the ambient rendering pass for transparent objects rendering. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped
render_skip_transparent_light	Variable. Print the value indicating if the rendering pass for world lights is skipped for transparent objects rendering. Command. Skip the world lights' rendering pass for transparent objects rendering. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped
render_skip_transparent_deferred	Variable. Print the value indicating if the deferred pass for transparent objects is skipped. Command. Skips the deferred pass for transparent objects. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped
render_skip_transparent_multiple_env_probes	Variable. Print the value indicating if the multiple environment probes mode for transparent objects is disabled. Command. Disables the multiple environment probes mode for transparent objects. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped

Meshes#

Operations on the mesh rendering.

Name	Description	Arguments
render_alpha_fade	Variable. Print the value indicating if alpha fading (dithering) is enabled for objects. Command. Use alpha fading (dithering) for objects.	0 - disabled 1 - enabled (by default)
render_show_dynamic	Variable. Print the value indicating if the visualizer for dynamic objects is displayed. Command. Display the visualizer for dynamic objects.	0 - hidden (by default) 1 - displayed

Mesh Loading#

Operations on the mesh loading.

Name	Description	Arguments
render_manager_create_meshes	Variable. Print the current loading mode for all meshes. Command. Force-load all meshes required to render each frame before rendering it instead of using streaming, that may take several frames. It can be used to render node previews or grabbing frames (full single-frame rendering). Insures against the majority of mesh loading lags at run time, but requires a proper "warmup" when loading a world, providing that all required meshes get into the viewing frustum. Notice This option may not eliminate all the lags, but significantly reduces their number. World loading time and VRAM consumption increase significantly.	0 - meshes are streamed to video memory when they get into the viewing frustum and removed from memory when necessary (by default) 1 - meshes required to render each frame are force loaded and kept in memory
render_manager_meshes_memory	Variable. Print the current cache memory limits for meshes, in percentage of the total GPU memory. Command. Set the cache memory limits for meshes, in percentage of the total GPU memory.	0 - 100 (15 by default)
render_manager_resource_check	Variable. Print the current resource check interval, in number of frames. Command. Set the resource check interval, in number of frames.	0 - 300 (300 by default)
render_manager_resource_update	Variable. Print the current resource update interval, in number of frames. Command. Set the resource update interval, in number of frames.	0 - 300 (30 by default)

Decals#

Operations on the mesh rendering.

Name	Description	Arguments
render_decals	Variable. Print the value indicating if decals should be rendered. Command. Render decals.	0 - disabled 1 - enabled (by default)

Fields#

Operations on the field rendering.

Name	Description	Arguments
render_field_height_resolution	Variable. Print the current resolution of the texture into which all textures set for all FieldHeight objects are rendered. Command. Set resolution of the texture into which all textures set for all FieldHeight objects are rendered.	0 - 128×128 1 - 256×256 2 - 512×512 (by default) 3 - 1024×1024 4 - 2048×2048 5 - 4096×4096 6 - 8192×8192
render_field_precision	Variable. Print the precision of textures used for field objects Command. Set the precision of textures used for field objects.	0 - 16-bit precision R16 texture (by default) 1 - 32-bit precision R32F texture
render_field_shoreline_resolution	Variable. Print the current resolution of the texture into which all textures set for all FieldShoreline objects are rendered. Command. Set resolution of the texture into which all textures set for all FieldShoreline objects are rendered.	0 - 128×128 1 - 256×256 2 - 512×512 (by default) 3 - 1024×1024 4 - 2048×2048 5 - 4096×4096 6 - 8192×8192

Textures#

Operations on the texture rendering.

Name	Description	Arguments
render_textures_quality	Variable. Print the current texture resolution. Command. Set the texture resolution.	0 - low resolution 1 - medium resolution 2 - high resolution (by default)
render_textures_max_resolution	Variable. Print the current maximum texture resolution. Command. Set maximum resolution of all textures. The engine doesn't compress existing textures: it uses specified mipmaps of *.dds textures.	0 - is 128x128 1 - is 256x256 2 - is 512x512 3 - is 1024x1024 4 - is 2048x2048 5 - is 4096x4096 6 - is 8192x8192 (by default) 7 - is 16384x16384 -5 - is 1x1
render_textures_min_resolution	Variable. Print the current minimum texture resolution. Command. Set minimum resolution of all textures. The engine doesn't compress existing textures: it uses specified mipmaps of *.dds textures.	0 - is 128x128 (by default) 1 - is 256x256 2 - is 512x512 3 - is 1024x1024 4 - is 2048x2048 5 - is 4096x4096 6 - is 8192x8192 7 - is 16384x16384 -5 - is 1x1
render_textures_filter	Variable. Print the current texture filtering mode. Command. Set the texture filtering mode.	0 - bilinear filtering 1 - trilinear filtering (by default)
render_textures_anisotropy	Variable. Print the current texture anisotropy level. Command. Set the texture anisotropy level.	0 - level 1 1 - level 2 2 - level 4 3 - level 8 (by default) 4 - level 16

Texture Loading#

Operations on the texture loading.

Name	Description	Arguments
render_manager_create_textures	Variable. Print the current loading mode for all textures. Command. Force-load all textures required to render each frame before rendering it instead of using streaming, that may take several frames. It can be used to render node previews or grabbing frames (full single-frame rendering). Insures against the majority of texture loading lags at run time, but requires a proper "warmup" when loading a world, providing that all required textures get into the viewing frustum. Notice This option may not eliminate all the lags, but significantly reduces their number. World loading time and VRAM consumption increase significantly.	0 - textures are streamed to video memory when they get into the viewing frustum and removed from memory when necessary (by default) 1 - textures required to render each frame are force loaded and kept in memory
render_manager_textures_memory	Variable. Print the current cache memory limits for textures, in percents of the total GPU memory. Command. Set the cache memory limits for textures, in percents of the total GPU memory.	0 - 100 (65 by default)
render_manager_textures_reload	Command. Reload all render manager's textures.
render_manager_texture_upload_chunk	Variable. Print the current maximum texture chunk size for uploading to GPU, in Kbytes. Command. Set the current maximum texture chunk size for uploading to GPU, in Kbytes.	0 - 131072 (128 by default)
render_manager_texture_upload_frametime_part	Variable. Print the current percentage of the frame, that can be used for uploading textures to GPU. Command. Set the current percentage of the frame, that can be used for uploading textures to GPU.	0 - 100 (10 by default)

Shaders#

Operations on shaders.

Name	Description	Arguments
render_defines	Command. Print the macros list related to the renderer (defines to make corresponding resources available in shaders).

Shader Loading#

Operations on the shader loading.

Name	Description	Arguments
render_manager_create_shaders	Variable. Print the value indicating if shaders are compiled on the start-up. Command. Compile all shaders that are used in the loaded world on start-up. Notice This command compiles and loads all shaders to RAM every time the world is loaded, which results in significant memory consumption. It is recommended to use pre-generated shaders cache instead when possible (see the shaders_create command). In this case necessary shaders are loaded from cache to RAM on demand.	0 - non-compiled (by default) 1 - compiled

Effects and Postprocesses#

Operations on the effects and postprocesses.

Name	Description	Arguments
render_animation_leaf	Variable. Print the value of a global scale for rotation angle of vegetation leaves. Command. Sets the global scale for rotation angle of vegetation leaves.
render_animation_scale	Variable. Sets the value of a global scale for rotation speed of vegetation leaves. Command. Sets the global scale for rotation speed of vegetation leaves.
render_animation_stem	Variable. Print the global scale for movement amplitude of vegetation stems. Command. Set the global scale for movement amplitude of vegetation stems.
render_animation_wind	Variable. Print the offset for vegetation under wind by X, Y and Z axes. Command. Sets the direction of wind for all vegetation (grass and trees). It is a multiplier for the stem offset (in grass, stem and leaves materials).
render_auxiliary	Variable. Print the value indicating if the auxiliary render buffer is enabled. Command. Enable auxiliary render buffer (should be enabled for render and post post-processes to work)	0 - disabled 1 - enabled (by default)
render_bent_normal_ray_tracing	Variable. Print the value indicating if the ray-traced bent normals calculation is enabled. Command. Enable the ray-traced bent normals calculation. The use of bent normals allows for smooth ambient lighting.	0 - disabled (by default) 1 - enabled
render_bent_normal_ray_tracing_denoise	Variable. Print the value indicating if the ray-traced bent normals calculation is enabled. Command. Enable the ray-traced bent normals calculation. This option reduces noise by using the blur effect.	0 - disabled (by default) 1 - enabled
render_bent_normal_ray_tracing_threshold	Variable. Print the value of the threshold for the ray-traced bent normals calculation. Command. Set the threshold value for the ray-traced bent normals calculation.	1.0f - by default
render_bloom	Variable. Print the value indicating if the bloom effect is enabled. Command. Enable the bloom effect.	0 - disabled (by default) 1 - enabled
render_bloom_passes	Variable. Print the current number of passes for the bloom effect. Command. Set the number of passes for the bloom effect. During each pass a bloom texture is generated. Up to 8 bloom textures can be generated: each texture has lower resolution (original size, original size /2, original size /4, so forth) with bloom effect. After that, all these bloom textures with the different resolution are composed for the final bloom texture..	[2; 8] - available range 6 - default
render_bloom_power	Variable. Print the value of the power of the bloom effect. Command. Set the power of the bloom effect.	[0.0f; 1.0f] - available range 0.7f - default
render_bloom_scale	Variable. Print the value of the bloom scale. Command. Set the value of the bloom scale.	[0.0f; 1.0f] - available range 0.3f - default
render_border	Variable. Print the width of the image border (in pixels), to be rendered outside the bounds of the screen to reduce artefacts of post effects. Command. Set the width of the image border (in pixels), to be rendered outside the bounds of the screen to reduce artefacts of post effects. Notice Increasing the width of the border may increase performance costs.
render_camera_effects_threshold	Variable. Print the brightness threshold, which is used to detect if an object should be blurred in the HDR mode. Command. Set the threshold, which is used to detect if an object should be blurred in the HDR mode.	[0.0f; 1.0f] - available range
render_camera_effects_temporal_filtering	Variable. Print the value indicating if temporal filtering is enabled. Command. Toggles temporal filtering on and off.	0 - disabled (by default) 1 - enabled
render_dirt_scale	Variable. Print the scale of lens dirt effect modulating the pattern of lens flares. Command. Set the scale of lens dirt effect modulating the pattern of lens flares. For example, it can be used to create an effect of unclean optics when the camera looks at the sun.
render_dof	Variable. Print the value indicating if the Gaussian blur depth of field effect is enabled. Command. Enable the Gaussian blur depth of field effect.	0 - disabled (by default) 1 - enabled
render_dof_blur	Variable. Print the intensity of blur for DoF (Depth Of Field) effect. Command. Set the intensity of blur for DoF (Depth Of Field) effect.	[0.0f; 1.0f] - available values
render_dof_chromatic_aberration	Variable. Print the intensity of chromatic aberration effect for DoF (Depth Of Field). Command. Set the intensity of chromatic aberration effect for DoF (Depth Of Field).
render_dof_far_distance	Variable. Print the far DoF limit of the camera. Command. Set the far DoF limit of the camera. The distance between the camera and the furthest element that is considered to be acceptably sharp.
render_dof_near_distance	Variable. Print the near DoF limit of the camera. Command. Set the near DoF limit of the camera. The distance between the camera and the nearest element that is considered to be acceptably sharp.
render_dof_focal_distance	Variable. Print the value of the camera focal distance. Command. Set the focal distance of the camera, i.e. a point where objects are in-focus and clear.
render_dof_far_focal_offset	Variable. Print the far focal offset for DoF (Depth Of Field) effect. Command. Set the far focal offset for DoF (Depth Of Field) effect. The offset from the focal point to the furthest blurred zone.
render_dof_near_focal_offset	Variable. Print the near focal offset for DoF (Depth Of Field) effect. Command. Set the near focal offset for DoF (Depth Of Field) effect. The offset from the focal point to the nearest blurred zone.
render_dof_resolution	Variable. Print the value indicating the resolution of DOF. Command. Set the DOF rendering resolution.	0 - quarter resolution 1 - half resolution 2 - full resolution (by default)
render_dof_quality	Variable. Print the value indicating the quality of DOF. Command. Set the DOF rendering quality.	0 - low 1 - medium (by default) 2 - high 2 - ultra
render_dof_bokeh_mode	Variable. Print the value indicating the mode of Bokeh DOF effect. Command. Set the DOF Bokeh effect mode.	0 - ring (by default) 1 - circle
render_dof_increased_accuracy	Variable. Print the value indicating if the DOF increased accuracy is enabled. Command. Enable or disable the DOF increased accuracy. Enabling the parameter allows for increasing accuracy of focusing calculation.	0 - disabled (by default) 1 - enabled
render_dof_focus_improvement	Variable. Print the value indicating if focus improvement is enabled for the DOF effect. Command. Enable or disable focus improvement for the DOF effect. When enabled, transitions between the focused and unfocused parts of the scene become more accurate.	0 - disabled (by default) 1 - enabled
render_exposure_mode	Variable. Print the mode of the adaptive exposure effect. Command. Set the mode of the adaptive exposure effect.	0 - disabled 1 - logarithmic adaptive exposure 2 - quadratic adaptive exposure
render_exposure	Variable. Print the camera exposure value. Command. Set the camera exposure value. Notice Available only when render_camera_mode = 0.	[0.0f; 4.0f] - available values
render_exposure_adaptation	Variable. Print the value of the period of exposure adaptation. Command. Set the value of the period of exposure adaptation.
render_iso	Variable. Print the current ISO value set for the physically-based camera. Command. Set the ISO for the physically-based camera.	100 by default
render_shutter_speed	Variable. Print the shutter speed set for the physically-based camera. Command. Set the shutter speed set for the physically-based camera.	250 by default
render_f_stop	Variable. Print the F-stop value set for the physically-based camera. Command. Set the F-stop value set for the physically-based camera.	11 by default
render_camera_mode	Variable. Print the value indicating which camera mode is set. Command. Set the camera mode: If the classic camera is used, the static exposure is set directly. If the physically-based camera is use, the static exposure calculation is based on physical parameters of the camera (ISO, shutter speed and f-stop).	0 - classic camera 1 - physically-based camera
render_white_balance	Variable. Print the value indicating if automatic white balance correction is enabled. Command. Enable or disable automatic white balance correction.	0 - disabled 1 - enabled (by default)
render_white_balance_intensity	Variable. Print the intensity of white balance correction. Command. Set the Intensity of white balance correction. Notice Do not set too high values for night-time and dimly lit scenes, as it may lead to heavy color distortion making the scene look totally unnatural.	[0.0f; 1.0f] - available range 0.3f - default
render_white_balance_adaptation_time	Variable. Print the time period (in seconds) during which white balance correction is performed. Command. Set the time period (in seconds) during which white balance correction is performed (0 is for instant correction). Notice It is recommended to use lower values, when possible, to make correction process unnoticeable, otherwise it'll be slow and will catch user's eye. However, setting too low values may result in abrupt switching of colors as the camera moves. So, adjust this parameter carefully to make transition smoooth. You can set it equal to the Exposure Adaptation value.	1.0f - default
render_supersampling	Variable. Print the number of samples per pixel used for supersampling. Command. Set the number of samples per pixel used for supersampling.	[1e-6f; 8.0f] - available range 1.0f - default
render_occluders	Variable. Print the value indicating if rendering of occluders is enabled. Command. Enable or disable rendering of occluders.	0 - disabled 1 - enabled (by default)
render_occluders_resolution	Variable. Print the current resolution of the texture, to which occluders are rendered. Command. Set the resolution of the texture, to which occluders are rendered.	From 1x1 To 1024x1024 Default: 128x64
render_occluders_shadows	Variable. Print the value indicating if rendering of occluders for shadows is enabled. Command. Enable or disable rendering of occluders for shadows.	0 - disabled (by default) 1 - enabled
render_occluders_shadows_resolution	Variable. Print the current resolution of the texture, to which occluders for shadows are rendered. Command. Set the resolution of the texture, to which occluders for shadows are rendered.	From 1x1 To 1024x1024 Default: 512x512
render_ssgi	Variable. Print the value indicating if SSGI effect is enabled. Command. Enable or disable the SSGI (Screen Space Global Illumination) effect.	0 - disabled (by default) 1 - enabled
render_ssgi_radius	Variable. Print the value of the SSGI radius. Command. Set the radius of the SSGI (Screen Space Global Illumination).	[0.0f; 1.0f] - available values 1.0f - default
render_ssgi_intensity	Variable. Print the value of the SSGI intensity. Command. Set the intensity of the SSGI (Screen Space Global Illumination) for the scene.	[0.0f; 1.0f] - available values 1.0f - default
render_ssgi_normal_threshold	Variable. Print the value of the SSGI normal threshold. Command. Set the normal threshold of the SSGI (Screen Space Global Illumination).	[0.0f; 1.0f] - available values 1.0f - default
render_ssgi_resolution	Variable. Print the SSGI effect resolution. Command. Set the resolution of SSGI (Screen Space Global Illumination).	0 - quarter resolution 1 - half resolution (by default) 2 - full resolution
render_ssgi_resolution_color	Variable. Print the value of the resolution of the color buffer used for SSGI. Command. Set the resolution of the color buffer used for SSGI (Screen Space Global Illumination) calculation. This option significantly affects performance.	0 - quarter resolution 1 - half resolution (by default) 2 - full resolution
render_ssgi_quality	Variable. Print the SSGI effect quality. Command. Sets the quality of the SSGI (Screen Space Global Illumination) (the number of the used samples).	0 - low (4 samples) 1 - medium (8 samples) (by default) 2 - high (16 samples) 3 - ultra (32 samples)
render_ssgi_ray_tracing	Variable. Print the value indicating if the ray tracing is used for SSGI (Screen Space Global Illumination) calculation. Command. Enable the ray tracing for SSGI (Screen Space Global Illumination) calculation. When enabled, SSGI recreates light reflections from the object’s surface. Ray-traced SSGI calculation is available only when the SSRTGI technique is enabled.	0 - disabled 1 - enabled (by default)
render_ssgi_ray_tracing_denoise	Variable. Print the value indicating if the noise reduction for the ray-traced SSGI (Screen Space Global Illumination) is enabled. Command. Enable the noise reduction for the ray-traced SSGI (Screen Space Global Illumination). This option reduces noise by using blur effect. Ray-traced SSGI calculation is available only when the SSRTGI technique is enabled.	0 - disabled 1 - enabled (by default)
render_ssgi_ray_tracing_threshold	Variable. Print the current threshold value for the ray-traced SSGI (Screen Space Global Illumination). Command. Set the threshold value for the ray-traced SSGI (Screen Space Global Illumination). Ray-traced SSGI calculation is available only when the SSRTGI technique is enabled.	1.0f - by default
render_fxaa	Variable. Print the value indicating if the FXAA is enabled. Command. Enable or disable the FXAA.
render_fxaa_intensity	Variable. Print the value of the FXAA intensity. Command. Set the intensity of the FXAA. Intensity specifies the sample offset of FXAA fragment.
render_taa	Variable. Print the value indicating if the TAA is enabled. Command. Enable or disable the TAA.
render_taa_antialiasing_in_motion	Variable. Print the value indicating if improved anti-aliasing in motion for TAA is enabled. Command. Enable or disable improved anti-aliasing in motion (moving camera and objects) when TAA is enabled.	0 - disabled (by default) 1 - enabled
render_taa_frame_count	Variable. Print the frame count of TAA. Command. Set the frame count of TAA (Temporal Anti-Aliasing). It specifies the number of frame for velocity buffer.	30.0f - default
render_taa_catmull_resampling	Variable. Print the value indicating if the Catmull-Rom resampling is enabled. Command. Toggles the Catmull-Rom resampling on and off. It allows you to reduce image blurring when the camera moves forward/backward. It is recommended to disable resampling at low settings.	0 - disabled 1 - enabled (by default)
render_taa_color_clamping	Variable. Print the value indicating if TAA color clamping is enabled. Command. Enable or disable TAA color clamping (when TAA is enabled). This command clamps the color of the current and previous frame. The image becomes more sharp.	0 - disabled TAA color clamping 1 - enabled (by default)
render_taa_diagonal_neighbors	Variable. Print the value indicating if diagonal neighboring pixels are to be taken into account in the process of color clamping. Command. Set the value indicating if diagonal neighboring pixels in the process of color clamping.	0 - ignore diagonal neighboring pixels (by default) 1 - consider diagonal neighboring pixels
render_taa_preserve_details	Variable. Print the value of the detail level of TAA (Temporal Anti-Aliasing). Command. Set the value for the detail level of TAA (Temporal Anti-Aliasing). The higher the value - the more detailed is the image. Can produce additional flickering.	[0.0f; 1.5f] - available range 1.5f - default
render_taa_pixel_offset	Variable. Print the size of the sample offset performed during sub pixel jittering. Command. Set the size of the sample offset performed during sub pixel jittering. By default, samples shift to one pixel during sub pixel jittering: you can lower this offset.	[0.0f; 1.0f] - available range 1.0f - samples shift to one pixel (by default)
render_taa_samples	Variable. Print the number of the sample offsets performed during sub pixel jittering. Command. Set the number of the sample offsets performed during sub pixel jittering. By the minimum value of 1, there will be no offsets, and, therefore, no anti-aliasing.	0 - 1 sample offset, no anti-aliasing 1 - 4 offsets 2 - 8 offsets 3 - 16 offsets
render_taa_max_frame_count	Variable. Print the maximum frame count of TAA. Command. Sets the maximum frame count of TAA (Temporal Anti-Aliasing). Specifies the maximum number of frames for velocity buffer.	60.0f - default
render_taa_min_frame_count	Variable. Print the minimum frame count of TAA. Command. Sets the minimum frame count of TAA (Temporal Anti-Aliasing). Specifies the minimum number of frames for velocity buffer.	4.0f - default
render_taa_velocity_clamping	Variable. Print the value indicating if TAA velocity clamping is enabled. Command. Enable or disable TAA velocity clamping (when TAA is enabled). This command controls the number of frames for velocity buffer. That reduces the blurring in dynamic scenes with a lot of moving objects.	0 - disabled TAA velocity clamping 1 - enabled (by default)
render_taa_velocity_threshold	Variable. Print the value of the TAA velocity threshold. Command. Sets the velocity threshold of TAA (Temporal Anti-Aliasing). This value specifies the intensity of velocity clamping.	[0.0f; 1.0f] - available range 1.0f - default
render_taa_fix_flicker	Variable. Print the value indicating if the bright pixels flicker fix is enabled. Command. Enable or disable the bright pixels flicker fix (when TAA is enabled). Notice Enabling fix flicker may increase performance costs.	0 - disabled fix flicker 1 - enabled (by default)
render_filmic	Variable. Print the value indicating if the filmic high-dynamic range color correction rendering is enabled. Command. Enable the filmic high-dynamic range color correction rendering.	0 - disabled (by default) 1 - enabled
render_filmic_shoulder_scale	Variable. Print the shoulder strength filmic tonemapping parameter value. Command. Set the shoulder strength filmic tonemapping parameter value.
render_filmic_linear_scale	Variable. Print the linear strength filmic tonemapping parameter value. Command. Set the linear strength filmic tonemapping parameter value.
render_filmic_linear_angle	Variable. Print the linear angle filmic tonemapping parameter value. Command. Set the linear angle filmic tonemapping parameter value.
render_filmic_toe_scale	Variable. Print the toe scale filmic tonemapping parameter value. Command. Set the toe scale filmic tonemapping parameter value.
render_filmic_toe_numerator	Variable. Print the toe numerator filmic tonemapping parameter value. Command. Set the toe numerator filmic tonemapping parameter value.
render_filmic_toe_denominator	Variable. Print the toe denominator filmic tonemapping parameter value. Command. Set the toe denominator filmic tonemapping parameter value.
render_filmic_white_level	Variable. Print the white level filmic tonemapping parameter value. Command. Set the white level filmic tonemapping parameter value.
render_bokeh	Variable. Print the value indicating if the bokeh effect is enabled. Command. Enable the bokeh effect.	0 - disabled (by default) 1 - enabled
render_cross	Variable. Print the value indicating if the cross flares effect is enabled. Command. Enable the cross flares effect.	0 - disabled 1 - enabled (by default)
render_cross_color	Variable. Print the color of the cross flares. Command. Set the color of the cross flares.
render_cross_scale	Variable. Print the value of the scale of the cross flares. Command. Set the scale of the cross flares, higher values produce more pronounced flares.
render_cross_shafts	Variable. Print the number of shafts in a cross flare. Command. Set the number of shafts in a cross flare. High number of flares can cause a FPS drop on low-performance hardware.
render_cross_length	Variable. Print the length of a cross flare. Command. Set the length of a cross flare. Higher values also lead to fading of the shafts across their length.
render_cross_angle	Variable. Print the cross flares orientation angle. Command. Set the cross flares orientation angle.
render_cross_threshold	Variable. Print the brightness threshold for areas to produce cross flares. Command. Set the brightness threshold for areas to produce cross flares. The higher the threshold value, the brighter the area should be to produce flare.
render_distance_scale	Variable. Print the global distance scale for all distance parameters: shadow distance, light distance, LOD distances, etc. Command. Set the global distance scale for all distance parameters: shadow distance, light distance, LOD distances, etc.
render_clutter_distance	Variable. Print the distance starting from which the Clutter nodes will not be rendered. Command. Set the distance starting from which the Clutter nodes will not be rendered.
render_decal_distance	Variable. Print the distance starting from which the Decal nodes will not be rendered. Command. Set the distance starting from which the Decal nodes will not be rendered.
render_field_distance	Variable. Print the distance starting from which the Field nodes will not be rendered. Command. Set the distance starting from which the Field nodes will not be rendered.
render_light_distance	Variable. Print the distance starting from which the Light nodes will not be rendered. Command. Set the distance starting from which the Light nodes will not be rendered.
render_object_distance	Variable. Print the distance starting from which the Object nodes will not be rendered. Command. Set the distance starting from which the Object nodes will not be rendered.
render_reflection_dynamic	Variable. Print the value indicating if dynamic reflection is enabled. Command. Enable dynamic reflection.	0 - disabled 1 - enabled (by default)
render_reflection_dynamic_blur	Variable. Print the value indicating if dynamic reflections blurring is enabled. Command. Enables blurring of dynamic reflections for materials.	0 - disabled (by default) 1 - enabled
render_reflection_lods	Variable. Print the value indicating if reduction of resolution of dynamic reflections when the camera moves away is enabled. Command. Enable reduction of resolution of dynamic reflections when the camera moves away.	0 - disabled 1 - enabled (by default)
render_reflection_distance	Variable. Print the distance starting from which reflections will not be rendered. Command. Set the distance starting from which reflections will not be rendered.
render_wireframe_color	Variable. Print the value of the wireframe color. Command. Sets the color for the wireframe.
render_background_color	Variable. Print the value of the background color. Command. Sets the color for the background.
render_fade_color	Variable. Print the fade color of the scene. Command. Set the fade color of the scene.
render_lens	Variable. Print the value indicating if the lens flares effect is enabled. Command. Enable the lens flares effect.	0 - disabled (by default) 1 - enabled
render_lens_color	Variable. Print the value of the lens flares color. Command. Set the value of the lens flares color.
render_lens_scale	Variable. Print the value of the lens flares scale. Command. Set the value of the lens flares scale.
render_lens_length	Variable. Print the value of the lens flares length, indicating if the whole radial lens flare is rendered on the screen or only a part of it. This option controls how lens flares pattern is distributed. Command. Set the value of the lens flares length, indicating if the whole radial lens flare is rendered on the screen or only a part of it. This option controls how lens flares pattern is distributed.
render_lens_radius	Variable. Print the value of the lens flares radius on the screen. Command. Set the value of the lens flares radius on the screen.
render_lens_threshold	Variable. Print the value of the brightness threshold for areas to produce lens flares. Command. Set the value of the brightness threshold for areas to produce lens flares: the higher the threshold value, the brighter the area should be to produce flares.
render_lens_dispersion	Variable. Print the value of the lens flares dispersion: displacement for for red, green and blue channels. Command. Set the value of the lens flares dispersion: displacement for for red, green and blue channels.
render_motion_blur	Variable. Print the value indicating if the motion blur effect is enabled. Command. Enable the motion blur effect.	0 - disabled 1 - enabled (by default)
render_motion_blur_camera_velocity	Variable. Print the value indicating if camera velocity contributes to the motion blur effect. Command. Enable camera velocity contribution to the motion blur effect. Notice Disabled in VR mode by default.	0 - disabled: only velocities of objects are taken into account. 1 - enabled (by default)
render_motion_blur_neat_silhouettes	Variable. Print the value indicating if neat silhouettes option for motion blur is enabled. Command. Enable the neat silhouettes option for motion blur. This option keeps contours of objects in front of the camera unblurred.	0 - disabled 1 - enabled (by default)
render_motion_blur_noise_intensity	Variable. Print the value of the current motion blur intensity. Command. Set the intensity of the noise used in the motion blur.	[0.0f; 1.0f] - range 0.25 - by default
render_motion_blur_num_steps	Variable. Print the current number of steps used in the motion blur. Command. Set the number of steps used in the motion blur.	4 - by default
render_motion_blur_velocity_scale	Variable. Print the scale value of bodies' linear and angular velocities used for the motion blur. Command. Set the scale value of bodies' linear and angular velocities used for the motion blur.
render_motion_blur_max_velocity	Variable. Print the maximum scaled velocity of bodies used for the motion blur. Command. Set the maximum scaled velocity of bodies used for the motion blur.
render_transparent_blur	Variable. Print the value indicating if the transparent blur effect is enabled. Command. Enable the transparent blur for materials. This option makes it possible to render matte transparent materials like matte glass.	0 - disabled 1 - enabled (by default)
render_refraction	Variable. Print the value indicating if refraction is enabled. Command. Enable refraction.	0 - disabled 1 - enabled (by default)
render_refraction_dispersion	Variable. Print the value of the refraction displacement. Command. Sets the refraction displacement for red, green and blue channels (according to refraction texture of refractive materials). Can be used to create light dispersion (chromatic aberrations).	0 - disabled 1 - enabled (by default)
render_sharpen	Variable. Print the value indicating if the sharpening effect is enabled. Command. Enable or disable the sharpening effect.	0 - disabled (by default) 1 - enabled
render_sharpen_intensity	Variable. Print the value of the sharpening effect intensity. Command. Set intensity of the sharpening effect.
render_vr_emulation	Variable. Print the value indicating the current VR-emulation mode. Command. Set the VR-emulation mode.	0 - disabled (by default) 1 - HTC Vive emulation 2 - HTC Vive Pro emulation 3 - Oculus Rift emulation
render_ssr	Variable. Print the value indicating if screen space reflections are enabled. Command. Enable or disable screen space reflections.	0 - disabled 1 - enabled (by default)
render_ssr_importance_sampling	Variable. Print the value indicating if the importance sampling mode is enabled for the SSR effect. Command. Enable the importance sampling mode for the SSR effect.	0 - disabled 1 - enabled (by default)
render_ssr_fast_tracing	Variable. Print the value indicating if fast tracing is enabled for the SSR effect. Command. Enable fast tracing for the SSR effect.	0 - disabled 1 - enabled (by default)
render_ssr_increased_accuracy	Variable. Print the value indicating if increased accuracy is enabled for the SSR effect. Command. Enable increased accuracy for the SSR effect.	0 - disabled 1 - enabled (by default)
render_ssr_denoise	Variable. Print the value indicating if noise reduction is enabled for the SSR effect. Command. Enable noise reduction for the SSR effect.	0 - disabled 1 - enabled (by default)
render_ssr_resolution	Variable. Print the resolution of screen space reflections. Command. Set the resolution of screen space reflections.	0 - render reflections in quarter resolution 1 - render reflections in half resolution (by default) 2 - render reflections in full resolution
render_ssr_resolution_depth	Variable. Print the resolution of the depth buffer used for SSR calculation. Command. Set resolution of the depth buffer used for SSR calculation.	0 - quarter resolution 1 - half resolution (by default) 2 - full resolution
render_ssr_resolution_color	Variable. Print the resolution of the color buffer used for SSR calculation. Command. Set resolution of the color buffer used for SSR calculation.	0 - quarter resolution 1 - half resolution (by default) 2 - full resolution
render_ssr_roughness_quality	Variable. Print the current quality of screen space reflections roughness. Command. Set the quality of screen space reflections roughness.	0 - low quality 1 - medium quality (by default) 2 - high quality 3 - ultra quality
render_ssr_num_rays	Variable. Print the number of rays of SSR per pixel that are used to calculate rough refrections. Command. Set the number of rays of SSR per pixel that are used to calculate rough refrections.	[1;64] 4 - default
render_ssr_num_steps	Variable. Print the number of steps of SSR per ray that are used for trace calculation. Command. Set the number of steps of SSR per ray that are used for trace calculation.	[1;64] 16 - default
render_ssr_step_size	Variable. Print the value size of the trace step used for SSR calculation. Command. Set the size of the trace step used for SSR calculation.	1 - default
render_ssr_noise_ray	Variable. Print the value . Command. Set the intensity of the ray noise used for SSR calculation.	[0.0f;1.0f] 0.5f - default
render_ssr_noise_step	Variable. Print the value . Command. Set the intensity of the step noise used for SSR calculation.	[0.0f;1.0f] 0.5f - default
render_ssr_visibility_roughness_min	Variable. Print the minimum roughness value starting from which the SSR effect begins to fade out. Command. Set the minimum roughness value, starting from which the SSR effect begins to fade out.	[0.0f;1.0f] 1.0f - default
render_ssr_visibility_roughness_max	Variable. Print the maximum roughness value starting from which the SSR effect is not rendered. Command. Set the maximum roughness value, starting from which the SSR effect is not rendered.	[0.0f;1.0f] 1.0f - default
render_ssr_threshold	Variable. Print the value that limits imitation of reflections in areas where SSR cannot get information.. Command. Set the value that limits imitation of reflections in areas where SSR cannot get information.	1.0f - default
render_ssr_threshold_occlusion	Variable. Print the value that limits imitation of environment cubemap occlusion in areas where SSR cannot get information. Command. Set the value that limits imitation of environment cubemap occlusion in areas where SSR cannot get information.	1.0f - default
render_ssrtgi	Variable. Print the value indicating if the SSRTGI (Screen-Space Ray-Traced Global Illumination) effect enabled. Command. Enable or disable SSRTGI.	0 - disabled 1 - enabled (by default)
render_ssrtgi_fast_tracing	Variable. Print the value indicating if the fast tracing for SSRTGI is enabled. Command. Enable or disable fast tracing for the SSRTGI. This option dynamically changes the step size to obtain indirect illumination bounces using low number of steps while keeping performance high. Disabling this option improves quality, but significantly reduces performance. To use this option, the SSRTGI effect must be enabled.	0 - disabled 1 - enabled (by default)
render_ssrtgi_increased_accuracy	Variable. Print the value indicating if the increased accuracy for SSRTGI is enabled. Command. Enable or disable the increased accuracy for the SSRTGI. This option reduces visual artifacts by increasing accuracy of the last step. To use this option, the SSRTGI effect must be enabled.	0 - disabled 1 - enabled (by default)
render_ssrtgi_noise_ray	Variable. Print the value of the SSRTGI ray noise intensity. Command. Set the intensity of the ray noise used for the SSRTGI calculation. This parameter is used to reduce the banding effect. The higher is the value, the less pronounced is the banding effect. To use this option, the SSRTGI effect must be enabled.	[0.0f;1.0f] 0.3f - default
render_ssrtgi_noise_step	Variable. Print the value of the SSRTGI step noise intensity. Command. Set the intensity of the step noise used for SSRTGI calculation. This parameter is used to reduce the banding effect. To use this option, the SSRTGI effect must be enabled.	[0.0f;1.0f] 0.3f - default
render_ssrtgi_num_rays	Variable. Print the number of rays used for SSRTGI calculation. Command. Set the number of rays used for SSRTGI calculation. The higher the value, the better quality. However, this option significantly affects performance. To use this option, the SSRTGI effect must be enabled.	[1;1024] 16 - default
render_ssrtgi_num_steps	Variable. Print the number of steps used for SSRTGI calculation. Command. Set the number of steps used for SSRTGI calculation. he higher is the value, the better is the quality. However, this option significantly affects performance. To use this option, the SSRTGI effect must be enabled.	[1;256] 3 - default
render_ssrtgi_resolution	Variable. Print the resolution of SSRTGI. Command. Set the resolution of SSRTGI. To use this option, the SSRTGI effect must be enabled.	0 - quarter resolution 1 - half resolution (default) 2 - full resolution
render_ssrtgi_resolution_depth	Variable. Print the resolution of the depth buffer used for SSRTGI calculation. Command. Sets the resolution of the depth buffer used for SSRTGI calculation. To use this option, the SSRTGI effect must be enabled.	0 - quarter resolution (default) 1 - half resolution 2 - full resolution
render_ssrtgi_step_size	Variable. Print the size of the step used for SSRTGI calculation. Command. Set the size of the step used for SSRTGI calculation. To use this option, the SSRTGI effect must be enabled.	2.0f - default
render_ssrtgi_upscaling	Variable. Print the value indicating if the upscaling for SSRTGI is enabled. Command. Enable or disable upscaling for the SSRTGI. This option makes the quality of edges in half and quarter resolution look closer to full. To use this option, the SSRTGI effect must be enabled.	0 - disabled 1 - enabled (by defaults)
render_sss	Variable. Print the value indicating if the subsurface scattering is enabled. Command. Enable or disable the subsurface scattering.	0 - disabled 1 - enabled
render_sss_radius	Variable. Print the value of the SSS (subsurface scattering radius) radius. Command. Set the subsurface scattering radius: distance in the screen space, within which colors will be sampled. It controls how much wrinkles, pores and cavities will be blurred and highlighted. The higher the value, the farther subsurface scattering reaches. Too high values result in the ghosting effect. By the minimum value of 0, no subsurface scattering is rendered.
render_sss_color	Variable. Print the value of the SSS (subsurface scattering radius) color. Command. Set a subsurface scattering color used to simulate the subsurface component of skin lighting, i.e. the light that bounces inside of the subsurface tissue layers (epidermis and dermis) before exiting. For skin, subsurface color is reddish, due to blood circulating in skin tissues.
render_sss_resolution	Variable. Print the value indicating which resolution mode is used for subsurface scattering. Command. Set the resolution mode to be used for subsurface scattering.	0 - quarter 1 - half (by default) 2 - full
render_sss_quality	Variable. Print a value indicating which subsurface scattering quality mode is used. Command. Set the quality mode for the subsurface scattering.	0 - low 1 - medium 2 - high 3 - ultra
render_ssbevel	Variable. Print the value indicating if the screen-space bevels are enabled. Command. Enable or disable the screen-space bevels.	0 - disabled 1 - enabled (by default)
render_ssbevel_vertex_normal	Variable. Print the current rendering mode of the screen-space bevels. Command. Set the rendering mode of the screen-space bevels. The following modes are available: Better Edges - smooths vertex and surface normals of the object. In this mode, the relief created by using Normal Mapping will be smoothed along with the mesh edges. Better Normals - smooths only vertex normals. In this mode, only edges of the mesh geometry will be bevelled.	0 - better edges 1 - better normals (by default)
render_ssbevel_quality	Variable. Print a value indicating which screen-space bevels quality mode is used. Command. Set the quality mode for the screen-space bevels.	0 - low 1 - medium (by default) 2 - high 3 - ultra
render_ssbevel_radius	Variable. Print the size of the screen-space bevel effect. Command. Set the size of the screen-space bevel effect.	[0.0f; 10.0f] 10.0f by default
render_ssbevel_noise	Variable. Print the value indicating if the noise that smooths bevels is enabled. Command. Set the value indicating if the noise that smooths bevels is enabled. It is recommended to use the noise with TAA enabled to avoid visual artifacts. The bevel noise is applied at a certain distance from the camera (i.e. if the camera is too far from the object with bevels, the noise won't be applied).	0 - disabled 1 - enabled (by default)
render_ssdirt	Variable. Print the value indicating if the Screen-Space Dirt effect is enabled. Command. Enable or disable the the Screen-Space Dirt effect.	0 - disabled (by default) 1 - enabled
render_ssdirt_quality	Variable. Print a value indicating which quality mode of the Screen-Space Dirt effect is used. Command. Set the quality mode of the Screen-Space Dirt effect.	0 - low 1 - medium 2 - high (by default) 3 - ultra
render_ssdirt_resolution	Variable. Print the value indicating the resolution of the Screen-Space Dirt effect. Command. Set the resolution of the Screen-Space Dirt effect.	0 - quarter 1 - half (by default) 2 - full
render_ssdirt_intensity	Variable. Print the intensity of the Screen-Space Dirt effect. Command. Set the intensity of the Screen-Space Dirt effect.	[0.0f; inf] 1.0f by default
render_ssdirt_radius	Variable. Print the size of the Screen-Space Dirt effect. Command. Set the size of the Screen-Space Dirt effect.	[0.0f; inf] 1.0f by default
render_ssdirt_threshold	Variable. Print the threshold of the Screen-Space Dirt effect. Command. Set the threshold of the Screen-Space Dirt effect. Determines the depth limit for the Screen-Space Dirt effect in areas where information cannot be obtained.	[0.0f; 1.0f] 1.0f by default
render_ssdirt_angle_bias	Variable. Print the angle bias value used for the Screen-Space Dirt effect. Command. Set the angle bias value used for the Screen-Space Dirt effect. Determines the angle limit for the Screen-Space Dirt effect where information cannot be obtained.	[0.0f; 1.0f] 0.35f by default
render_ssdirt_perspective	Variable. Print the perspective value used for the Screen-Space Dirt effect. Command. Set the perspective value used for the Screen-Space Dirt effect. Determines the degree of impact of distance from the camera on the radius of the Screen-Space Dirt effect.	[0.0f; 1.0f] 0.02f by default
render_ssdirt_increase_accuracy	Variable. Print the value indicating if increased accuracy is enabled for the Screen-Space Dirt effect. Command. Set the value indicating if increased accuracy is enabled for the Screen-Space Dirt effect. Notice This option should be used to remove visual artefacts along the screen edges, in case if they appear. Otherwise, it shoud be disabled.	0 - disabled (by default) 1 - enabled
render_ssdirt_cavity_texture_size	Variable. Print the cavity texture size value used for the Screen-Space Dirt effect. Command. Set the cavity texture size value used for the Screen-Space Dirt effect. Texture scaling factor for cavities.	[0.0f; inf] 1.0f by default
render_ssdirt_cavity_color	Variable. Print the color multiplier for the cavity albedo texture used for the Screen-Space Dirt effect. Command. Set the color multiplier for the cavity albedo texture used for the Screen-Space Dirt effect.
render_ssdirt_cavity_exponent	Variable. Print the cavity exponent value used for the Screen-Space Dirt effect. Command. Set the cavity exponent value used for the Screen-Space Dirt effect. Rate of gradual change of intensity along the radius for cavities.	[0.0f; inf] 1.0f by default
render_ssdirt_cavity_metalness	Variable. Print the cavity metalness of the Screen-Space Dirt effect. Command. Set the cavity metalness of the Screen-Space Dirt effect. Metalness multiplier used for cavities, when set to 0, the effect does not modify metalness buffer in cavities.	[0.0f; 1.0f] 0.0f by default
render_ssdirt_cavity_metalness_visibility	Variable. Print the cavity metalness visibility factor of the Screen-Space Dirt effect. Command. Set the cavity metalness visibility factor of the Screen-Space Dirt effect. Degree of impact of the effect on metalness buffer for cavities.	[0.0f; 1.0f] 0.0f by default
render_ssdirt_convexity_texture_size	Variable. Print the convexity texture size value used for the Screen-Space Dirt effect. Command. Set the convexity texture size value used for the Screen-Space Dirt effect. Texture scaling factor for convexities.	[0.0f; inf] 1.0f by default
render_ssdirt_convexity_color	Variable. Print the color multiplier for the convexity albedo texture used for the Screen-Space Dirt effect. Command. Set the color multiplier for the convexity albedo texture used for the Screen-Space Dirt effect.
render_ssdirt_convexity_exponent	Variable. Print the convexity exponent value used for the Screen-Space Dirt effect. Command. Set the convexity exponent value used for the Screen-Space Dirt effect. Rate of gradual change of intensity along the radius for convexities.	[0.0f; inf] 1.0f by default
render_ssdirt_convexity_metalness	Variable. Print the convexity metalness of the Screen-Space Dirt effect. Command. Set the convexity metalness of the Screen-Space Dirt effect. Metalness multiplier used for convexities, when set to 0, the effect does not modify metalness buffer in convexities.	[0.0f; 1.0f] 0.0f by default
render_ssdirt_convexity_metalness_visibility	Variable. Print the convexity metalness visibility factor of the Screen-Space Dirt effect. Command. Set the convexity metalness visibility factor of the Screen-Space Dirt effect. Degree of impact of the effect on metalness buffer for convexities.	[0.0f; 1.0f] 0.0f by default

Lighting and Shading#

Operations on the lighting and shading.

Name	Description	Arguments
render_environment	Variable. Print the value indicating if the environment is enabled. Command. Use the environment.	0 - disabled 1 - enabled (by default)
render_environment_cubemap_blend	Variable. Print the environment cubemap blending mode. Command. Set the environment cubemap blending mode.	0 - alpha blend (by default) 1 - additive blend 2 - multiply 3 - overlay
render_environment_haze	Variable. Print the current mode of haze rendering. Command. Set the mode of haze rendering.	0 - disabled the haze 1 - enabled the haze colored the specific color 2 - enabled the haze colored the sky LUT (by default)
render_environment_haze_gradient	Variable. Print the environment haze gradient mode. Command. Set the environment haze gradient mode.	0 - better for short distance range 1 - better for long distance range
render_lights_max_per_batch	Variable. Print the current number of lights per batch call. Command. Set maximum number of lights per batch call.	0 - disabled optimization (by default)
render_lights_tile_grid_size	Variable. Print the grid size in tiles per axis (8 by default). Command. Set the grid size in tiles per axis.
render_lights_forward_per_object_env	Variable. Print the current maximum number of environment probes per object (available only for materials rendered in the forward rendering pass). Command. Set the maximum number of environment probes per object (available only for materials rendered in the forward rendering pass).	[0; 128] - the range 4 - by default
render_lights_forward_per_object_omni	Variable. Print the current maximum number of omni lights per object (available only for materials rendered in the forward rendering pass). Command. Set the maximum number of omni lights per object (available only for materials rendered in the forward rendering pass).	[0; 128] - the range 4 - by default
render_lights_forward_per_object_proj	Variable. Print the current maximum number of projected lights per object (available only for materials rendered in the forward rendering pass). Command. Set the maximum number of projected lights per object (available only for materials rendered in the forward rendering pass).	[0; 128] - the range 4 - by default
render_lights_forward_per_object_voxel	Variable. Print the current maximum number of voxel probes per object (available only for materials rendered in the forward rendering pass). Command. Set the maximum number of voxel probes per object (available only for materials rendered in the forward rendering pass).	[0; 128] - the range 4 - by default
render_lights_forward_per_object_world	Variable. Print the current maximum number of world lights per object (available only for materials rendered in the forward rendering pass). Command. Set the maximum number of world lights per object (available only for materials rendered in the forward rendering pass).	[0; 128] - the range 4 - by default
render_lights_lens_flares	Variable. Print the value indicating if rendering of per-light lens flares is enabled. Command. Enable or disable rendering of per-light lens flares.	0 - disabled 1 - enabled (by default)
render_lights_upscaling	Variable. Print the current upscaling mode for rendering lights during the deferred pass. Command. Set the upscaling mode for rendering lights during the deferred pass. This option enables rendering of lights during the deferred pass in reduced resolution with subsequent texture upscaling. Notice This option can be used to gain performance for scenes containing a lot of lights, when some of the screen-space effects (such as SSR, SSRTGI, screen-space shadows) are enabled, as the same buffers are used. In other cases it may reduce performance, so it is recommended to use profiling tools to make sure that a positive effect is obtained. May cause flicker in VR applications when TAA is enabled. Notice	0 - upscaling is disabled (by default) 1 - render lights in half resolution with 2x upscaling 2 - render lights in quarter resolution with 4x upscaling
render_ssao	Variable. Print the value indicating whether screen-space ambient occlusion is enabled. Command. Use screen-space ambient occlusion.	0 - disabled 1 - enabled
render_ssao_ray_tracing_denoise	Variable. Print the noise reduction for the ray-traced SSAO is enabled. Command. Enable the noise reduction for the ray-traced SSAO (Screen Space Ambient Occlusion). This option reduces noise by using blur effect. Ray-traced SSAO calculation is available only when the SSRTGI technique is enabled.	0 - disabled 1 - enabled (by default)
render_ssao_ray_tracing_threshold	Variable. Print the current threshold value for the ray-traced SSAO. Command. Set the threshold value for the ray-traced SSAO. Ray-traced SSAO calculation is available only when the SSRTGI technique is enabled.	[0.0f; 1.0f] - available values 1.0f - default
render_ssao_ray_tracing	Variable. Print the ray tracing for SSAO is enabled. Command. Enable the ray tracing for SSAO (Screen Space Ambient Occlusion) calculation. When enabled, SSAO provides more realistic shadows between the objects. Ray-traced SSAO calculation is available only when the SSRTGI technique is enabled.	0 - disabled 1 - enabled (by default)
render_ssao_cavity	Variable. Print the value indicating whether the cavity option for the SSAO is enabled. Command. Enables or disables the cavity option for the SSAO effect. This option improves (sharpens) the look of junction contours at low resolutions, so it should be used for detail enhancement (small stones, bolts and so on).	0 - disabled 1 - enabled
render_ssao_cavity_intensity	Variable. Print the intensity of sharpening of contours for the cavity option. Command. Set the intensity of sharpening of contours for the cavity option.	1.0f - by default
render_ssao_cavity_radius	Variable. Print the size of junction contours area for the cavity option. Command. Set the size of junction contours area for the cavity option.	1.0f - by default
render_ssao_radius	Variable. Print the value of the SSAO radius. Command. Set the radius of SSAO (Screen Space Ambient Occlusion).	[0.0f; 1.0f] - available values 1.0f - default
render_ssao_threshold	Variable. Print the current threshold value for the SSAO. Command. Set the threshold value for the SSAO.	[0.0f; 1.0f] - available values 0.5f - default
render_ssao_intensity	Variable. Print the value of the SSAO intensity. Command. Set the intensity of the SSAO (Screen Space Ambient Occlusion) for the scene.
render_ssao_intensity_lighted_side	Variable. Print the value of the SSAO intensity for the scene object's lighted side. Command. Set the intensity of the SSAO (Screen Space Ambient Occlusion) for the scene object's lighted side.
render_ssao_intensity_reflection	Variable. Print the value of the SSAO intensity on reflections. Command. Sets the intensity of SSAO (Screen Space Ambient Occlusion) on reflections.	1.0f - default
render_ssao_quality	Variable. Print the value indicating the quality of screen-space ambient occlusion. Command. Set screen-space ambient occlusion quality.	0 - use 4 samples 1 - use 8 samples 2 - use 16 samples 3 - use 32 samples
render_ssao_resolution	Variable. Print the value indicating the resolution of screen-space ambient occlusion. Command. Set screen-space ambient resolution quality.	0 - quarter 1 - half (by default) 2 - full
render_ssao_noise	Variable. Print the value indicating if screen-space ambient occlusion noise is enabled. Command. Enable the screen-space ambient occlusion noise.	0 - disabled 1 - enabled
render_gbuffer_lightmap	Variable. Print the value indicating if the G-Buffer lightmap is enabled. Command. Enable G-Buffer lightmap usage.	0 - skip G-Buffer lightmap 1 - use G-Buffer lightmap (by default)

Geodetics#

Operations on geodetics.

Name	Description	Arguments
render_show_geodetic_pivot	Variable. Print the value indicating if geodetic pivots are shown. Command. Display geodetic pivots.	0 - the geodetic pivot is hidden (by default) 1 - the geodetic pivot is displayed

Shadows#

Operations on shadows.

Name	Description	Arguments
render_shadows	Variable. Print a value indicating whether shadows are rendered or not. Command. Enable shadows rendering.	0 - disabled 1 - enabled (by default)
render_shadows_alpha_test	Variable. Print a value indicating whether alpha test for shadows is enabled. Command. Enable or disable alpha test for shadows.	0 - disabled 1 - enabled (by default)
render_shadows_precision	Variable. Print the value indicating the current precision of soft shadows. Command. Set the value indicating the current precision of soft shadows.	0 - 16-bit precision 1 - 32-bit precision (by default)
render_shadows_screen_space	Variable. Print the value indicating if the screen-space shadows are enabled. Command. Enable or disable screen-space shadows.	0 - disabled 1 - enabled (by default)
render_shadow_distance	Variable. Print the distance starting from which shadows will not be rendered. Command. Set the distance starting from which shadows will not be rendered.
render_shadow_shafts	Variable. Print the value indicating if shadow shafts are enabled. Command. Enable shadows shafts.	0 - disabled 1 - enabled (by default)
render_shadow_shafts_exposure	Variable. Print the value of the contrast used for volumetric shadows. Command. Set the contrast used for volumetric shadows.	[0.0f; 1.0f] - available values 0.0f - shadows are not seen
render_shadow_shafts_length	Variable. Print the value of the volumetric shadows length. Command. Set the length of volumetric shadows.	[0.0f; 1.0f] - available values 0.0f - shadows are not seen 1 - shadows are long enough to occupy the whole screen
render_sun_shafts	Variable. Print the value indicating if sun shafts are enabled. Command. Enable sun shafts.	0 - disabled 1 - enabled (by default)
render_sun_shafts_color	Variable. Print the color of the sun shafts. Command. Set the color of the sun shafts.
render_sun_shafts_scale	Variable. Print the scale of the sun shafts. Command. Set the scale of the sun shafts, higher values produce larger shafts.
render_sun_shafts_length	Variable. Print the length of the sun shafts. Command. Set the length of the sun shafts.
render_sun_shafts_attenuation	Variable. Print the attenuation value of the sun shafts. Command. Set the attenuation value of the sun shafts.
render_sun_shafts_threshold	Variable. Print the threshold of the sun shafts. Command. Set the threshold of the sun shafts.
render_show_cascades	Variable. Print the value indicating if Parallel Split Shadow Map (PSSM) splits for world lights are enabled. Command. Enable Parallel Split Shadow Map (PSSM) splits for world lights.	0 - disabled (by default) 1 - enabled
render_show_penumbra	Variable. Print the value indicating if penumbra (half-shade regions) in color is enabled. Command. Enable penumbra (half-shade regions).	0 - disabled (by default) 1 - enabled
render_shadows_soft	Variable. Print the value indicating if the soft shadows are used. Command. Enable or disable the soft shadows.	0 - disabled 1 - enabled
render_shadows_soft_quality	Variable. Print the value indicating if the quality of the soft shadows. Command. Set the quality of the soft shadows.	0 - low 1 - medium 2 - high
render_shadows_omni_jitter	Variable. Print the value indicating if the jittering for shadows casted by the omni light sources is enabled. Command. Enable or disable jittering for shadows casted by the omni light sources.	0 - disabled 1 - enabled
render_shadows_world_lerp_cascades	Variable. Print the value indicating if linear interpolation of shadow cascades is enabled. Command. Enable or disable linear interpolation of shadow cascades, making transitions between cascades smoother. This option significantly affects performance, as 2 shadow maps are rendered in transition areas.	0 - disabled 1 - enabled

Clouds Rendering#

Name	Description	Arguments
render_clouds_downsampling_rendering	Variable. Print a value of the downsampling rendering for clouds. Command. Set the downsampling rendering for clouds. This parameter determines clouds resolution based on current screen resolution. It has a significant impact on performance.	0 - full 1 - half (by default) 2 - quarter
render_clouds_dynamic_coverage_area	Variable. Print a value of the dynamic coverage area for clouds. Command. Set the dynamic coverage area for clouds. This parameter determines visibility distance for coverage of FieldWeather objects.	10000 - by default
render_clouds_dynamic_coverage_resolution	Variable. Print a value of the dynamic coverage resolution for clouds. Command. Set the dynamic coverage resolution for clouds. This parameter determines the quality of dynamic coverage texture for FieldWeather objects. Higher values make it possible to preserve texture details at high distances.	0 - 128×128 1 - 256×256 (by default) 2 - 512×512 3 - 1024×1024 4 - 2048×2048
render_clouds_ground_shadows	Variable. Print a value indicating if the rendering of shadows from the clouds on the ground. Command. Enable rendering of shadows from the clouds on the ground.	1 - enable (by default) 2 - disable
render_clouds_interleaved_rendering	Variable. Print a value indicating if the interleaved rendering mode for clouds is enabled. Command. Enable the interleaved rendering mode for clouds.	0 - disabled (by default) 1 - 2×2 2 - 4×4 3 - 8×8
render_clouds_lighting_cone_radius	Variable. Print a value of the lighting cone sampling radius for clouds. Command. Set the lighting cone sampling radius for clouds lighting.	[0.0f; 1.0f] - the range 0.3f - default
render_clouds_lighting_quality	Variable. Print the value of the lighting quality for clouds. Command. Set lighting quality for clouds. This parameter determines the number of samples used to calculate lighting for clouds.	0 - 1 sample, low quality 1 - 3 samples, medium quality (by default) 2 - 5 samples, high quality 3 - 6 samples, ultra quality
render_clouds_lighting_tracelength	Variable. Print a value of the lighting trace length for clouds lighting. Command. Set the lighting trace length for clouds lighting.	[1.0f; 2048.0f] - the range 230.0f - by default
render_clouds_noise_step	Variable. Print the current value of the noise step parameter for clouds. Command. Set the noise step parameter value for clouds.	[0.0f; 1.0f] - the range 0.3f - default
render_clouds_noise_step_skip	Variable. Print the current value of the noise step skip parameter for clouds. Command. Set the noise step skip parameter value for clouds.	[0.0f; 1.0f] - the range 0.3f - default
render_clouds_noise_iterations	Variable. Print the current value of the noise iterations parameter for clouds. Command. Set the noise iterations parameter value for clouds.	[0.0f; 1.0f] - the range 0.1f - default
render_clouds_noise_lighting	Variable. Print the current value of the noise lighting parameter for clouds. Command. Set the noise lighting parameter value for clouds.	[0.0f; 1.0f] - the range 0.3f - default
render_clouds_samples_count	Variable. Print the number of samples used for clouds rendering. Command. Set the number of samples used for clouds rendering.	0 - 1 sample, low quality 1 - 3 samples, medium quality 2 - 5 samples, high quality (by default) 3 - 6 samples, ultra quality
render_clouds_sampling_quality	Variable. Print the sampling quality set for clouds. Command. Set the sampling quality for clouds. This parameter determines the number of samples used and affects cloud density.	0 - 1 sample, low quality (higher cloud density) 1 - 3 samples, medium quality (by default) 2 - 5 samples, high quality 3 - 6 samples, ultra quality (lower density, the clouds are softer)
render_clouds_shadow_shafts	Variable. Print a value indicating if the shadow shafts for clouds are enabled. Command. Enable shadow shafts for clouds.	0 - disabled 1 - enabled (by default)
render_clouds_simplified_depth_test	Variable. Print a value indicating if the simplified depth test for clouds is enabled. Command. Enable simplified depth test for clouds.	0 - disabled 1 - enabled (by default)
render_clouds_soft_intersection	Variable. Print a value of the soft intersection distance for clouds. Command. Set the soft intersection distance for clouds.	[0.0f; 100000.0f] - range 100.0f - by default
render_clouds_transparent_order	Variable. Print a value indicating if rendering of clouds after all transparent objects (except water) is enabled. Command. Enable rendering of clouds after all transparent objects (except water).	0 - disabled (by default) 1 - enabled

Terrain Rendering#

Notice

The commands described below affect only terrain (the ObjectTerrain class).

Name	Description	Arguments
render_terrain_anisotropy	Variable. Print a value indicating the current terrain texture anisotropy level. Command. Set the terrain texture anisotropy level.	0 - anisotropy level 1 1 - anisotropy level 2 2 - anisotropy level 4 (default) 3 - anisotropy level 8 4 - anisotropy level 16
render_terrain_displacement	Variable. Print the value indicating if displacement mapping is enabled for terrain rendering. Command. Enable or disable displacement mapping for terrain rendering.	0 - disable 1 - enable (by default)
render_terrain_displacement_normal	Variable. Print the value indicating if displacement mapping for terrain rendering uses normals. Command. Enable or disable use of normals in displacement mapping for terrain rendering.	0 - disable 1 - enable (by default)
render_terrain_holes	Variable. Print the value indicating if decal-based terrain holes are enabled. Command. Enable or disable rendering of decal-based terrain holes.	0 - disable 1 - enable (by default)
render_terrain_refined_albedo	Variable. Print a value indicating what terrain albedo textures (coarse or refined) are used. Command. Set the type (coarse or refined) of albedo terrain textures.	0 - use coarse albedo 1 - use refined albedo
render_terrain_refined_mask	Variable. Print a value indicating what terrain mask textures (coarse of refined) are used. Command. Set the type (coarse of refined) of mask terrain textures.	0 - use coarse mask 1 - use refined mask
render_terrain_refined_normal	Variable. Print a value indicating what terrain normal textures (coarse of refined) are used. Command. Set the type (coarse of refined) of normal terrain textures.	0 - use coarse normal 1 - use refined normal
render_terrain_triplanar	Variable. Print the value indicating if triplanar texture mapping is enabled for terrain rendering. Command. Enable or disable triplanar texture mapping for terrrain rendering.	0 - disable (planar UV-mapping is used) 1 - enable (by default)

Water Rendering#

Notice

The commands described below affect only global water (the ObjectWater class).

Name	Description	Arguments
render_water_anisotropy	Variable. Print a value indicating the current water texture anisotropy level. Command. Set the water texture anisotropy level. Variable. Print the value indicating the current water texture anisotropy level. Command. Set the water texture anisotropy level.	0 - anisotropy level 1 1 - anisotropy level 2 (default) 2 - anisotropy level 4 3 - anisotropy level 8 4 - anisotropy level 16
render_water_environment_probes	Variable. Print the value indicating if environment probes are enabled for water rendering. Command. Enable or disable environment probes for water rendering.	0 - disable 1 - enable (by default)
render_water_voxel_probes	Variable. Print the value indicating if voxel probes are enabled for water rendering. Command. Enable or disable voxel probes for water rendering.	0 - disable 1 - enable (by default)
render_water_lights	Variable. Print the value indicating if lights are enabled for water rendering. Command. Enable or disable lights for water rendering.	0 - disable 1 - enable (by default)
render_water_opacity_depth	Variable. Print the value indicating if writing depth for water in opacity buffer is enabled. Command. Enable or disable writing depth for water in opacity buffer.	0 - disable 1 - enable (by default)
render_water_refraction_quality	Variable. Print the value of water refraction quality. Command. Set the quality of water refraction.	0 - low quality 1 - medium quality 2 - high quality 3 - ultra quality (by default)
render_water_ssr	Variable. Print a value indicating if the water screen-space reflections are enabled. Command. Enable the water screen-space reflections.	0 - disabled 1 - enabled (by default)
render_water_ssr_quality	Variable. Print a value indicating which water screen-space reflections quality mode is used. Command. Set the quality mode for the water screen-space reflections.	0 - low 1 - medium 2 - high 3 - ultra
render_water_ssr_increased_accuracy	Variable. Print a value indicating if the increased accuracy for the water screen-space reflections is enabled. Command. Enable the increased accuracy for the water screen-space reflections.	0 - disabled 1 - enabled
render_water_shafts	Variable. Print the value indicating if underwater shafts are enabled. Command. Enable or disable underwater shafts.	0 - disable 1 - enable (by default)
render_water_shoreline_wetness	Variable. Print the value indicating if shoreline wetness is enabled. Command. Enable or disable shoreline wetness.	0 - disable 1 - enable (by default)

Output Modes#

Name	Description	Arguments
render_panorama	Variable. Print the value indicating which mode of panoramic rendering is enabled. Command. Enable panoramic rendering of the specified mode. Notice If the panoramic rendering is enabled, underwater shafts and water line effects will be disabled.	0 - disabled panoramic rendering (by default) 1 - a 180-degree panorama with curved edges 2 - a 180-degree linear panorama without distortion at the edges 3 - a 180-degree spherical panorama (fisheye) 4 - a 360-degree panorama with curved edges 5 - a 360-degree linear panorama without distortion at the edges 6 - a 360-degree spherical panorama (fisheye)
render_stereo	Variable. Print the value indicating the current stereo rendering mode. Command. Set the stereo rendering mode (it is not possible to set a stereo mode via a console if a default system script is used; it allows for setting it only on the start-up).	0 - disabled (by default) 1 - enabled anaglyph stereo 2 - enabled interlaced stereo 3 - enabled horizontal stereo 4 - enabled vertical stereo
render_stereo_hidden_area	Variable. Print the value indicating the current culling mode for pixels that are not visible in VR. Command. Set the culling mode for pixels that are not visible in VR.	0 - culling disabled (by default) 1 - OpenVR-based culling mode. Culling is performed using meshes returned by OpenVR. 2 - Custom culling mode. Culling is performed using an oval or circular mesh determined by custom adjustable parameters.
render_stereo_hidden_area_transform	Variable. Print the value indicating the current culling mode for pixels that are not visible in VR. Command. Set Size (X, Y) and offset (Z, W) along the X and Y axes respectively for a custom oval or circular mesh used for culling pixels, that are not visible in VR (requires render_stereo_hidden_area = 2).	(1.0f, 1.0f, 0.0f, 0.0f) - default
render_stereo_reprojection	Variable. Print the value indicating the current stereo reprojection rendering mode for VR. Command. Set the stereo reprojection rendering mode for VR (allows to render 45 FPS as 90 FPS). Notice Reprojection does not give an x2 performance gain as there are a lot of other things to be rendered in addition to the ones rendered per-eye (such as shadow maps etc.). Moreover, in case of a CPU bottleneck, reprojection won't give any gain at all. It is recommended to enable stereo reprojection in the following cases: you have a stable 70-80 fps and just need some extra boost to get to 90 you have a fluctuating fps (like 90, then 45, and 90 again), in this case reprojection will help you to get stable 90 In case if your initial fps is below 45, reprojection will half the framerate, and you'll end up having a completely messed up image. In this case reprojection should be disabled.	0 - disabled (by default) 1 - dynamic reprojection (slower, but more accurate, more pronounced ghost effect) 2 - fast reprojection (fast, reduced ghost effect, but clipping of frontal parts of moving objects may occur)
render_stereo_reprojection_fix_blur	Variable. Print the value indicating if improved blur reduction is enabled for screen during stereo reprojection. Command. Enable or disable improved blur reduction is enabled for screen during stereo reprojection. Notice This option can be disabled, when possible, to gain some performance.	0 - disabled 1 - enabled (by default)
render_stereo_reprojection_buffers_fix_blur	Variable. Print the value indicating if improved blur reduction is enabled for buffers (SSAO, SSR, etc.) during stereo reprojection. Command. Enable or disable improved blur reduction is enabled for buffers (SSAO, SSR, etc.) during stereo reprojection. Notice This option can be disabled, when possible, to gain some performance.	0 - disabled 1 - enabled (by default)
render_stereo_reprojection_threshold	Variable. Print the threshold value used for stereo reprojection, when the fast mode (render_stereo_reprojection = 2) is used. Command. Set the threshold value used for stereo reprojection, when the fast mode (render_stereo_reprojection = 2) is used. Higher values reduce clipping of frontal parts of moving objects, but make the ghost effect more pronounced. Lower values reduce the ghost effect, but make clipping of frontal parts of moving objects more pronounced.	[0.0f; inf] 1.0f - default

Other Settings#

Name	Description	Arguments
render_occlusion_queries	Variable. Print the value indicating if a query test is run. Command. Run an additional hardware occlusion query test before sending data to the GPU.	0 - disable occlusion query 1 - enable occlusion query (by default)
render_occlusion_queries_num_frames	Variable. Print the value indicating the number of frames required for the occlusion query update. Command. Set the number of frames for the occlusion query update. Notice Make sure that the additional hardware occlusion query test is run.	Number of frames
render_virtual_resolution	Variable. Print the value of the virtual screen resolution. Command. Set the virtual screen resolution. This option can be used to render video with high resolution (e.g. 8K) regardless of monitor's resolution.	(-1; -1) - by default Available values range is [0;16384]
render_max_fps	Variable. Print the current maximum FPS value, to which rendering FPS is clamped. Command. Set the maximum FPS value, to which rendering FPS is to be clamped.	0 - disables FPS clamping (by default)

Renderers#

Name

Description

Arguments

video_debug

Variable. Print the value indicating whether the debug context is enabled.
Command. Enable the debug context of OpenGL or DirectX 11. To come to effect, the command requires video_restart to be run after it.
Notice
Enabling the debug context may cause performance drop (~30-40%).

Direct X:

0 to disable
1 to write all DirectX errors (red) and warnings (yellow). If the error occurred, it means that there is a mistake in API.
2 to write all DirectX errors (red) and warnings (yellow). If the error occurred, the engine will crash and the full callstack will be shown.

OpenGL:

0 to disable
1 to write all OpenGL errors (red) and warnings (yellow). If the error occurred, it means that there is a mistake in API.
2 works in the same way as 1 mode.

DirectX 11#

Operations on the Direct3D11 API.

Name	Description	Arguments
d3d11_render_desc	Command. Print the information about the hardware configuration.
d3d11_render_use_compute_shader_11	Variable. Print the value indicating if the Direct3D 11 level compute shader is applied. Command. Apply the Direct3D 11 level compute shader.	0 - not applied 1 - applied (by default)
d3d11_render_use_tessellation	Variable. Print the value indicating if tessellation is enabled. Command. Enable tessellation.	0 - disabled 1 - enabled (by default)

OpenGL#

Operations on the OpenGL API.

Name	Description	Arguments
gl_render_renderer	Command. Print the information on the graphics card.
gl_render_vendor	Command. Print the manufacturer of the OpenGL driver.
gl_render_version	Command. Print the version of the OpenGL driver.
gl_render_shading_language	Command. Print the version of the OpenGL shading language.
gl_render_extensions	Command. Print OpenGL render extensions.
gl_render_use_arb_compute_shader	Variable. Print the value indicating if the GL_ARB_compute_shader extension is set. Command. Set the GL_ARB_compute_shader extension.	0 - not set (by default) 1 - set
gl_render_use_arb_sample_shading	Variable. Print the value indicating if the GL_ARB_sample_shading extension is set. Command. Set the GL_ARB_sample_shading extension.	0 - not set 1 - set (by default)
gl_render_use_arb_tessellation_shader	Variable. Print the value indicating if the GL_ARB_tessellation_shader extension is set. Command. Set the GL_ARB_tessellation_shader extension.	0 - not set 1 - set (by default)
gl_render_skip_errors	Variable. Print the value indicating if OpenGL errors are skipped. Command. Skip OpenGL errors.	0 - checked (by default) 1 - skipped

OpenAL Settings#

Operations on the OpenAL API.

Name	Description	Arguments
al_sound_renderer	Command. Print the information on the sound card.
al_sound_vendor	Command. Print the manufacturer of the OpenAL driver.
al_sound_version	Command. Print the version of the OpenAL driver.
al_sound_extensions	Command. Print the available OpenAL sound extensions.
alc_sound_extensions	Command. Print OpenAL context sound extensions.
al_sound_skip_errors	Variable. Print the value indicating if OpenAL errors are skipped. Command. Skip OpenAL errors.	0 - checked (by default) 1 - skipped

Plugins#

Operations on external plugins.

Name	Description	Arguments
plugin_load	Command. Loads an external plugin.	External plugin name.
plugin_reload	Command. Reloads an external plugin.	External plugin name.
plugin_quit	Command. Quits and unloads an external plugin.	External plugin name.

Bake Lighting#

Operations on the Bake Lighting tool.

Name	Description	Arguments
bake_lighting_bounces	Variable. Print the current number of light bounces. Command. Set the number of light bounces.	[1; 32] - the range 1 - by default
bake_lighting_per_frame	Variable. Print the current number of voxels computed and visualized per single frame. Command. Set the number of voxels computed and visualized per single frame.	[1; 100] - the range 1 - by default
bake_lighting_voxel_size_multiplier	Variable. Print the current multiplier of voxel size. Command. Set the voxel size multiplier.	[0.0; 8.0] - the range 1.0 - by default
bake_lighting_start	Command. Start bake lighting.
bake_lighting_stop	Command. Stop bake lighting.

Screenshots#

Operations on the screenshot.

Name	Description	Arguments
video_extension	Variable. Print the current screenshot format. Command. Set a screenshot format.	0 - TGA (by default) 1 - DDS 2 - PNG 3 - JPG
video_grab	Command. Take a screenshot. Notice A screenshot is saved in the bin/screenshots directory by default. You can specify another directory.	A path to the folder the screenshots will be saved in (optional)

General Information#

Memory Info#

Operations, representing information on the system memory.

Name	Description
memory_dump	Command. Print information on the memory dump in form of the fragmentation map.
memory_info	Command. Print information on the memory usage: Heap usage - size of the heap memory Memory usage - size of the used system memory Allocations - number of allocations
memory_save	Command. Dump memory pools (useful for offline analysis).

CPU Info#

Operations, representing information on the CPU.

Name	Description
cpu_info	Command. Print information on the CPU and instruction set supported by it.
cpu_frequency	Command. Print the CPU frequency in MHz.
cpu_count	Command. Print the number of available CPUs.

System Info#

Operations, representing information on the system.

Name	Description
binary_info	Command. Print information on the engine binary.
system_info	Command. Print information on the operating system and the engine build version.
system_memory	Command. Print the system memory size in Mbytes.

GPU Info#

Operations, representing information on the GPU.

Name	Description
gpu_info	Command. Print the video card and driver versions.
gpu_memory	Command. Print the video memory size in Mbytes.
gpu_count	Command. Print the number of available GPUs.

Last update: 27.12.2018

Помогите сделать статью лучше

Была ли эта статья полезной?

Сообщить о проблеме в этой статье

(или выберите слово/фразу и нажмите Ctrl+Enter

Console

In This Article:

How to Open Console#

Console Operation#

Command Syntax#

Hints#

How to Change the Console Opening Key#

Console#

Console GUI#

Engine#

Engine Configuration File#

Engine Analyzer#

World#

World State#

World Resources#

World Queueing#

Sound#

Sound Resources#

Material Manager#

Camera#

File System#

File System Info#

Editor#

Editor Controls#

Assets#

Scripts#

Editor Script Analyzer#

System Script Analyzer#

World Script Analyzer#

Script Debugger#

Multi-Threading#

Asynchronous Operations#

Visualizer#

World Debugging#

Node Debugging#

Occluder Debugging#

Physics Debugging#

Texture Debugging#

Occlusion Queries#

Performance Profiling#

Profiler GUI#

Microprofile#

Video Settings#

Resolution and Full Screen#

Graphics Settings#

Multi-Monitor and Stereo Rendering#

Rendering Settings#

Rendering Resources#

Rendering Buffers#

Rendering Buffer Info#

Rendering Buffer Debugging#

Rendering Passes#

Meshes#

Mesh Loading#

Decals#

Fields#

Textures#

Texture Loading#

Shaders#

Shader Loading#

Effects and Postprocesses#

Lighting and Shading#

Geodetics#

Shadows#

Clouds Rendering#

Terrain Rendering#

Water Rendering#

Output Modes#

Other Settings#

Renderers#

DirectX 11#

OpenGL#

OpenAL Settings#

Plugins#

Bake Lighting#

Screenshots#

General Information#

Memory Info#

CPU Info#

System Info#